Quick RCA question

[BallinByNature 10+ year member]

im gonna be using 2 RF p500.2s to 2 L710s my question is:when using a line driver will i get the same volts to my other amp when i use the lineout rca jack???

Click to read more...

 

[99FordExp]

im gonna be using 2 RF p500.2s to 2 L710s my question is:when using a line driver will i get the same volts to my other amp when i use the lineout rca jack???

as long as the amp is hooked up to the line driver of course, then yes. im assuming your using splitters to run both amps or does your line driver have dual outputs?

edit: splitters or dual outputs, regardless, youll get the same volts

 

[loopkiller 10+ year member]

A splitter will only split amperage, not voltage. Since you don't need much current for a preamp signal, splitting is fine.

 

[jco1385 5,000+ posts]

i think he means input on one amp, then from that amps outputs to the next amp.

and i have no idea. good question

 

[loopkiller 10+ year member]

Ah then that would be up to the amp. Some amps do power the line outs to match the HU output. Some are simply a splitter like I mentioned before. Either way, it should be just fine.

 

[jco1385 5,000+ posts]

you could bust out the DMM

 

[loopkiller 10+ year member]

you could bust out the DMM

Truth! //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[BallinByNature 10+ year member]

does any 1 know???

 

[jco1385 5,000+ posts]

use a DMM to see. it's amp specific.

 

[BallinByNature 10+ year member]

use a DMM to see. it's amp specific.

how??

 

[jco1385 5,000+ posts]

inner pin is POS outer ring is NEG

IIRC it's AC volts

 

[BallinByNature 10+ year member]

oh ok

 

[99FordExp]

A splitter will only split amperage, not voltage. Since you don't need much current for a preamp signal, splitting is fine.

now u just confused the guy

 

[99FordExp]

A splitter will only split amperage, not voltage. Since you don't need much current for a preamp signal, splitting is fine.

explain why the voltage wouldnt be the same if both amps are hooked to the line driver?

 

[jco1385 5,000+ posts]

he didn't say that??

wat. i'm fckin confused now...