Squeak, how exactly are those frequency ranges obtained and why would they be useless?
They are useless because they don't include the effects of the enviornment or different enclosures. How they are rated varies manufacturer to manufacturer (another reason they are useless)....but many are probably rated in an anechoic chamber.
If a manufacturer "rates" response down to 20hz, but I put the sub into a ported enclosure tuned to 50hz, I can promise you it won't play 20hz well....at all.
Likewise, if they rate response only down to 30hz in an anechoic chamber, then I put the sub in a sealed enclosure in my car, it may have flat response down to 10hz due to the transfer function.
As far as cone size and SQ...if the 15s and 18s have added output at the lower subwoofer frequency range (10hz-30hz), then they would lack output at the higher subwoofer frequency range (35hz-70hz). The 10s and 12s would be the other way around having less output at the lower range and more at the upper end.
Wrong. Low frequency extension (output) is dictated by factors such as Vd (how much air the sub can move) and Qtc (or box volume & tuning frequency, if a ported enclosure).
High frequency extension dictated by Le; or voice coil inductance. A large sub will not necessarily have high Le, and therefore will not necessarily lack in high frequency capability. Don't believe me? Look at pro audio...they have 15" and 18"
midwoofers. Just the same, you can have an 8" with very poor high frequency response....why? Because of a high Le.
Sure, you could build an SQ system with 18s for subs, but you better have a good front stage to keep up with them
If you are playing the sub balls to the wall....yeah, maybe. But that's solely for balance of the frequency spectrum..so that the bass isn't overwhelming the rest of the music spectrum. But then again, you could always just lower the output of the sub //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif
...such as 8s or 10s in the doors that can play cleanly down to 40hz (give or take a few hz).
Erm.....No. Large subs can play higher frequencies fine (Le allowing, ofcourse). Ask audiolife on here about his pair of 15" IDW's...he lowpassed them at 90hz, and qualified for IASCA world finals with such //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif Again, high frequency extension is dictated by Le, not subwoofer diameter.