Quick inverted question

[JL12W7INAGS300 10+ year member]

Hey guys, I have a 13W7 in a sealed box that I want to try inverted, just to see how it sounds. Since it is dual voice coil, how should I wire it? Thanks!

the amps a 1000/1 if that matters

Click to read more...

 

[squeak12 10+ year member]

Mounting a W7 inverted is extremely hard.

 

[SAG3 5,000+ posts]

Mounting a W7 inverted is extremely hard.

x2

bet you never thought about that you n00b.

 

[JL12W7INAGS300 10+ year member]

whats hard about it?

 

[Wowimzz 10+ year member]

with a single sub inverted you really dont have to worry about switching the phase. and it would be hard to do it inverted unless you take off your baffle, mount the sub the other way, and put the baffle back on; because of the way that you have to mount them in the first place.

 

[Chevyaudio 5,000+ posts]

whats hard about it?

Think about how the W7 mounts....

With the metal ring

 

[amartin_72]

x3 ... you probably dont even own the w7 yet and its all a big dream. If you have the w7 in your posession you shouldnt be asking why its hard to invert mount.

 

[JL12W7INAGS300 10+ year member]

i have two W7's a 13.5 and a 12, the 13 is for sale on eBAy

 

[JL12W7INAGS300 10+ year member]

Think about how the W7 mounts....
With the metal ring

So you take out the sub, put all the rings n shit on it, then turn the baffle the other way around and screw the baffle into the box. Whats hard about it

 

[JL12W7INAGS300 10+ year member]

Im asking why its hard because I just did it, there was nothing hard about it. I would post pics but some immature bastards would probably put it in thier avatar.

 

[Chevyaudio 5,000+ posts]

So you take out the sub, put all the rings n shit on it, then turn the baffle the other way around and screw the baffle into the box. Whats hard about it

nothing other than you have to TAKE YOUR FUCKING BOX APART TO GET THE SUB OUT. oh and inverting the sub will have 0 effect on output

 

[JL12W7INAGS300 10+ year member]

so thats not hard at all, espically an unfinshed box. It will have an affect on the output because the box is sealed and kind of small.

 

[Chevyaudio 5,000+ posts]

Read my above post....NO

 

[JL12W7INAGS300 10+ year member]

okay, care to elborate?

 

[Chevillac 5,000+ posts]

I dont know about you guys, but I cant take my baffle off.

I do want to see pics though.