Quick fiberglass question

[iceteebone 5,000+ posts]

i did my driver's side pod awhile back, but ran into some **** and didn't get the other one done. now i want to do the other one, but the highs here only get into the 40's or 50's on a good day. can i still glass in these temps?

Click to read more...

 

[azbass 5,000+ posts]

can you do it in your garage with some heat lamps?

 

[azbass 5,000+ posts]

also you can add a little more mekp to harden quicker.

 

[iceteebone 5,000+ posts]

can you do it in your garage with some heat lamps?

don't have heat lamps. i figured i could do the mold inside the car and turn the car on and run the heater for awhile. i got an electric heater for in the garage i suppose i could use.

 

[Classick96 10+ year member]

also you can add a little more mekp to harden quicker.

and use a hair dryer to help it

 

[iceteebone 5,000+ posts]

also you can add a little more mekp to harden quicker.

what is that?

 

[NhustlaR 10+ year member]

you can glass outside, then bring it inside your (basement?) and let it harden there. thats what i did last winter. if you cant do it that way, make the mixture a lil hot by adding some more hardener.

 

[req 5,000+ posts]

i would say no. i tried it and it took forever to work. i do not glass in any temp below 60 and a sunny day now.

 

[ramos 5,000+ posts]

I do it, but I take it inside to cure near a heater. I also use a heat gun sometimes as well. More hardener will work to a point but can have adverse effects if you get carried away with it ( smoke is bad //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif ) //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif