Question About Wiring Mono Block

[Tgilchrist 10+ year member]

I have a alpine pdx 1.1000 and i want to wire it to 2 alpine type R's at 1 ohm. will each type R get half the rated rms?(which is 1000w x 1 @ 2 or 4 ohms). i dont even know if you can wire it at 1 ohm it doesnt mention you can but ive seen a pdx 1.1000 set up at 8 ohms between 4 subs and it doesnt say anything about 8 ethier. so i guess my questions are..

- can i wire a pdx 1.1000 at 1 ohm?

- if i can will it get 500 watts rms to each type r?

Click to read more...

 

[Skittles619 10+ year member]

That amp isnt stable at 1 ohm

 

[misfit138 5,000+ posts]

Wire the subs to 4 ohms.

 

[ecko_0113 10+ year member]

just run them at 4 ohms, they should be getting around 500 each

 

[ikillzombienuns 10+ year member]

that amp should be stable down to 2ohm load also it puts out the same power no matter what the load is (8/6/4/2) thats the beauty of these amps and yes roughly 500 a piece and thats plenty for the alpine type-r's trust me you will be plenty pleased