Question about Sealed boxes

[dinkaTHEdon 10+ year member]

I was thinking of breakin my subs in before the port arrives, just low volume to get the motor moving for a week before I put the port in, would shared chambered sealed be okay with the subs or would it **** em up bad.

Click to read more...

 

[Bettr n' Revrse 5,000+ posts]

Why would it? What subs and whats your box specs?

 

[dinkaTHEdon 10+ year member]

American bass xd 8's in a 1.85ish ft3 box, getting a 3'' port next week.

 

[Bettr n' Revrse 5,000+ posts]

American bass xd 8's in a 1.85ish ft3 box, getting a 3'' port next week.

Be careful with the gains since that is pretty big sealed

 

[dinkaTHEdon 10+ year member]

im not even gonna turn it up at all, maybe a hair lol just need it to run to get loose so when the port gets here it'll be ready to use.

 

[Bettr n' Revrse 5,000+ posts]

im not even gonna turn it up at all, maybe a hair lol just need it to run to get loose so when the port gets here it'll be ready to use.

Moat all subs dont really need a break in just take it easy for a couple days...

 

[Mitch86 5,000+ posts]

Break in isn't really required...but as long as you don't crank it too high, you should be ok to run them for a few days in the sealed box. Also I would suggest at least a 4" port for 2 8s.. a 3" is tiny!

 

[dinkaTHEdon 10+ year member]

i already ordered the 3''port tho lol, the specs asked for 3 so im getting 3, 3 inch hole with 16 inches inside the box, Im not looking for spl, it is going inside a single cab truck. I'll post the build later I'm still finishing up the box as we speak

 

[supermaxx123 10+ year member]

If its not turned up, its not gonna move. It's not gonna "break in" with regular use it will wear in on its own.