Project PANDBASSA

[RookieMekanik 10+ year member]

I dont know if you already said, but what type of wood is that?

1" waterproof plywood, will make it double, so the box will be like like 2" thick //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[RAM_Designs 5,000+ posts]

1" waterproof plywood, will make it double, so the box will be like like 2" thick //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

How much does that run you over there?

 

[Mitch86 5,000+ posts]

Wow, that has to be the easiest wall build ever. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif Looks great so far!

 

[Supergumby5000 5,000+ posts]

i r jealous of that vehicle.

this is gonna be sick.

 

[allout13 10+ year member]

1" waterproof plywood, will make it double, so the box will be like like 2" thick //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

nice, I want to do my next box out of birch. cant wait to see this thing done //content.invisioncic.com/y282845/emoticons/thumbsupwink.gif.129404938effda6ad9cca39e7f4b58a3.gif

 

[RookieMekanik 10+ year member]

How much does that run you over there?

Sry my eng here, did you mean the cost of it ?

45dollars 1 sheet (4x8ft), bought 6 just in case //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

Hopefully can continue on monday, but well see, some ppl like xmas so i have to wait //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[Mr. Slate 10+ year member]

If you're doing a lot of power, then your box needs to be thicker especially the back wall.

I had a Yugo which is the closest thing to a Panda in the U.S.

This is how I started the build. The walls were framed with 2x6 pieces layered with 2 sheets of MDF.

I then ripped this out and made the walls out of concrete.

I never finished the project because I couldn't get the darn car to start so I scrapped it, lol.

 

[DUMPED 10+ year member]

what numbers are you aiming for with the build again?

also just to reiterate what has been mentioned already.. you need to definately

make all sides of the enclosure A LOT more thicker.

If you'd like I can email you pics of a PANDA build thats going on here at this time //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

Just PM me your email address

 

[RookieMekanik 10+ year member]

Same time why i need the bottom piece to be so thick ?

it wont flex through the bottom anyway lol

sides and the top will be 2" thick as i dont wanna lose any space and will put a metal bars to tight the side walls and front and back wall anyway ...

Same time i can always upgrade the box //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Feeding the subs with 2 x DD Z1's @ 0.5 ohm, so around 5K each i presume

 

[RAM_Designs 5,000+ posts]

Feeding the subs with 2 x DD Z1's @ 0.5 ohm, so around 5K each i presume

Are you running a 16V system? I doubt you'd see that much without running 16V...

 

[DUMPED 10+ year member]

Are you running a 16V system? I doubt you'd see that much without running 16V...

correct //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[RookieMekanik 10+ year member]

Are you running a 16V system? I doubt you'd see that much without running 16V...

Why ? ANY resonable explanation for that ?

These amps are not capable for over 15V anyway .. if theyr not modded like Z1A is

proven specs:

12 Volts & one battery only:

4.6 ohms = 2279W

2.3 ohms = 3405W

1.15 ohms = 4188W

 

14,4 Volts:

4.6 ohms = 3042W

2.3 ohms = 4461W

1.15 ohms = 5358W

So im running them on 4 x NSB90 12.8v batts and @ 0.5 ohm

or im missing something here ? //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

yeah maybe il get 4800w out of one amp, maybe 5100, doesnt make a big difference for me at this stage //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

Like i said, i think i get ROUGHLY 5K out of 1 amp with these batteries and @ 0.5 ohm //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Mr. Slate 10+ year member]

How many batteries?

 

[RookieMekanik 10+ year member]

How many batteries?

As i wrote in my previous post //content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif

4 x North Star NSB90's, i think theyr even on the pic on previous page ...

 

[Mr. Slate 10+ year member]

And this is for the SM class?