Pre-made spacers?

[aggybong 10+ year member]

Looking for something for my Toyota Camry. I've been told the max depth is 2.75 inches, and the speakers I am probably going to get are 2.80. Are there any pre-made spacers that would extend it another .10 inches or so?

Click to read more...

 

[Starky 10+ year member]

your local car audio place should carry some.....probably plastic ones...or you could some MDF rings

 

[aggybong 10+ year member]

Anything online though? Stores usually charge way too much

 

[desi_daru 10+ year member]

jus make them outta some mdf dude its REALLY easy and if u dont have the tools prety sure sum1 u no does

easiest way is 2 make a cardboard cutout of wat u need, by holding it 2 the door n trimmin it 2 size then tracing it on2 the board of wood then cutout the speaker by tracing it on and screw it all 2gether

 

[zachzchw 5,000+ posts]

I got a pair of 1" spacers for $12 at Best Buy.....about the same price as buying online, after shipping and all. If you want to get them online, look at http://www.partsexpress.com, they should have some.

 

[theCybe 5,000+ posts]

If you only need a quarter inch or less, use rope-caulk.

[hold the jokes.] //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[AllStar1500bd 5,000+ posts]

I like the cardboard idea, but seriously, if it is that skinny of spacing that you need just use some builder's clay or something easy like that. Should improve your SQ too.

 

[desi_daru 10+ year member]

I like the cardboard idea, but seriously, if it is that skinny of spacing that you need just use some builder's clay or something easy like that. Should improve your SQ too.

are u referring to my previous post about using the cardboard cutout, that was jus 2 make a template for 3/4"mdf or any other size