PPI 4200am buy or not?

[IamDeMan 5,000+ posts]

bump. Can anyone please explain why I have two red power wires and what the hell do I do with them?

They both get hooked up to main power wire. Use a distro to connect it.

 

[IamDeMan 5,000+ posts]

Nice ****ing amp btw

 

[Grinder1989 5,000+ posts]

Thanks man. I noticed I need a crossover too lol what king of crossover should I get? What are the real power ratings of this amp?

EDIT: I noticed that the amp has had a cap. replaced on the inside so it should be in working order. It also has no fuse internally. I'm going to buy a distrobution block and if it is fused will that be ok for the amp? LMK

 

[Grinder1989 5,000+ posts]

bump

 

[IamDeMan 5,000+ posts]

Thanks man. I noticed I need a crossover too lol what king of crossover should I get? What are the real power ratings of this amp?
EDIT: I noticed that the amp has had a cap. replaced on the inside so it should be in working order. It also has no fuse internally. I'm going to buy a distrobution block and if it is fused will that be ok for the amp? LMK

Yes, a fuseable distro will work. On the XO I am not sure. I think this was the pwoer ratings on the 450.

4 x 50W @ 4 ohms (12V - 0.02% THD)

4 x 100W @ 2 ohms (12V)

4 x 200W @ 1 ohm (12V)

4 x 400W @ .5 ohm (12V)

2 x 200W @ 4 ohm Bridged (12V)

2 x 400W @ 2 ohm Bridged (12V)

2 x 800W @ 1 ohm Bridged (12V)

I don't know if PPI claimed it to be .5ohm stereo stable or 1 ohm brideged stable, but many people did with luck, It is definitely over built. I think PPI only claimed 1 ohm stereo and 2 ohm bridged.

 

[Grinder1989 5,000+ posts]

0.5 and 1 ohm mono stable? or just stereo?

 

[Grinder1989 5,000+ posts]

bump

 

[Grinder1989 5,000+ posts]

bump