Ported box, wires

[solidcrowd 10+ year member]

I just got done building my box and i was gunna buy a speaker terminal for the wires but instead im just gunna drill a hole instead, but i was wondering where to drill it. it may be a dumb question but i didnt want to screw up anythin with the tunning. .thankz.

Click to read more...

 

[zthumper 10+ year member]

Just make sure ya seal up the holes good and you'll be fine.

 

[solidcrowd 10+ year member]

I was thinkin the orange because if its right in the back the wires would be go past the port and i didnt know if that would do anything

 

[Ingleside 10+ year member]

orange

 

[SQBubble 10+ year member]

orange

as long as u seal it good i dont see a difference..

 

[Ingleside 10+ year member]

yes, as long as the hole is sealed it'll be ok. i would just have the wire coming out of the box at a lower spot so it doesn't "hang" off the outside.

 

[Worlddre 5,000+ posts]

i vote orange as well

 

[solidcrowd 10+ year member]

Alright thankz for the help, what should i sealed it up with though, wood glue??? or should i buy some of that can foam

 

[Worlddre 5,000+ posts]

silcone sealant will do

 

[chevy_man 10+ year member]

If you're really lazy and don't show off the system, you can always bypass the hassle of drilling and sealing holes and just run the wires out the vent. It does look ghetto and if you show off at all I would just run them out the back on a lower corner where it's not to obvious and seal it well with silicone.

 

[Trixter 10+ year member]