ok so i have scrap 1/2 inch mdf wood laying around and i built a ported box to these dem 37inchs long,28 wide, 13.5 tall with a middle wall dividing to chambers for 2 12" subs . and the ports for each chamber is 2 x 12.5” port, 16.375” long and i was wondering what it was tuned to
-
3Participant count
-
Participant list
jellyfish420 10+ year member
i design boxes .......
you mean you built a ported box, and are now trying to find the tuning?
Immacomputer 10+ year member
Cloud disappear
About 3.2 cubes before sub displacement tuned to 34hz. I bet that thing will flex like a *****.
- Thread Starter
- #4
thx yeah that what i figured using 1/2 mdf but thats all i had laying around with out throwing any money in to it
Activity
No one is currently typing a reply...
Similar threads
The DD tank has the extreme cab 20hz avg record….160+ for a minute
yes….I have
Yeah, saw that too, was like ??? wtf! They do know there stuff, I usually just roll with it!
- Started by Justin Salaro
- Subwoofers
You could try to make the port longer, but there might be other reasons with the box won't extend lower, or even the sub. You'd have to reverse...
- Started by Manu
- Enclosure Design & Construction
While that program is pretty neat, it assumes you know the values. I was just recapping the numbers you provided. RS recommends the following...
- Started by JuiceTin
- Enclosure Design & Construction
Whoa, that will be one skinny port. The width of the back wall ports will be 1.08" wide (27.5mm), but the front port will be shared by 2 subs so...
- Started by MitchnSystem
- Enclosure Design & Construction
About this thread
New threads
-
2017 cherokee latitude help with sub- Started by SamuraiRob
- Replies: 1
-
-
-
-