Port placement.

[bass-aholic 10+ year member]

How far is the least you could get away with having a port in an SUV from the back hatch? Sub up port back situation. I think i may be suffocating the port on my new enclosure and might have to change up where everything is located so the port can breathe more.

Click to read more...

 

[dumpin907 10+ year member]

like 5-6 inch

 

[adas Pro Seller]

At least the same width of the port IMO

 

[bass-aholic 10+ year member]

At least the same width of the port IMO

//content.invisioncic.com/y282845/emoticons/wow.gif.23d729408e9177caa2a0ed6a2ba6588e.gif My ports 24" wide. I can only squeeze maybe 10 inches if i find a new place for the batteries so the box can slide up against the back of the seats. Theres no way i can get near 24" of room.

 

[SPY 5,000+ posts]

Your port is 24x24???

Use the smaller side of your port and space it at least that far away from the hatch. The more distance the better.

 

[ExpoSport 10+ year member]

i read i believe that it should be the distance of the samllest side of the port. if it's closer, it'll lower the tuning of the box a little

 

[MikeyB 5,000+ posts]

The distance of the port width, or it sounds like in your case, the ports height if your running the port crx style.

 

[bass-aholic 10+ year member]

Oh the port height. My port is 5" high by 24" wide. So should i give it 5 inches of room or just try and relocate the batts and give it the full 10"?

 

[MikeyB 5,000+ posts]

Atleast 5inches and you should be fine. I would shoot for more than that though ideally....if you can get more than definately do so