plans for kicker COMP vr 12...

[geowick07 10+ year member]

anyone have any plans for this sub? looking for a vented enclosure around 2.25cubes with driver installed. not looking to have it built, just need some good plans to go by. Thanks!

Click to read more...

 

[Chevyaudio 5,000+ posts]

http://www.caraudio.com/forum/showthread.php?t=137804

should be something in there that will work for ya...next time //content.invisioncic.com/y282845/emoticons/search.gif.e79a63b2b580b39b282dff402646b704.gif before you ask.

 

[geowick07 10+ year member]

thanks but i have already looked in there.....looking for 2.25 cubes after driver at around 32-35 htz. the plans in there are close, but not exactly what i am looking for. if i knew how to tune a box, i.e. what the steps are, i could probably use one of those plans

 

[geowick07 10+ year member]

so how many sheets of mdf are we talkin about to build that 2.25 @ 32hz enclosure? 3 or 4?

 

[Chevyaudio 5,000+ posts]

you can do it with 1 sheet. If you are economical with your cut layout. I built a 9 cube box gross out of a sheet and 1/2

 

[geowick07 10+ year member]

ok.....so 1 sheet. what about fasteners? just some wood screw and glue? and then silicone to seal it up right?

 

[iamamp3pimp 5,000+ posts]

its not just that simple.

but heres what i use

screws (not drywall screws, but coarse threaded brass screws)

Titebond 2

any type of silicon

time

and more time

a router, a circ saw, and a drill.

3m spray glue (77) for the carpet, and razors to cut it all.