Bricktop13 10+ year member
Junior Member
Selling My Phoenix Gold OUTLAW 1845 Limited Edition 1 of 1600 made
This is one Badass collectors piece
It's in really great shape, pulled it from my running system about 10 years ago and it has been sitting under my bed in a box ever since.
The Outlaws sold new for about $1500 - 15 years ago.
My Avatar pic is the actual amp.
As for feedback, and more pictures, You can check my feedback rating on Ebay: Item# 130423838717
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=130423838717&ssPageName=STRK:MESELX:IT
View attachment 26520137
The Max Wattage for this Amp if you bridge all the outputs is:
• 745 WRMS @ 4 ohms (13.8V) Or 700 WRMS @ 2 ohms (13.8V)
OUTLAW Specs
• Gold Plated 2 Layer, 2 ounce Copper G10 Glass-Epoxy Printed Circuit Board
• Dual power inputs
• High-Current Triple-Darlington Output Stage design
• Tri-Linear output capacity (simultaneous stereo & bridged mono operation)
• Stereo 12dB per octave, continuously variable crossover from 30 to 500Hz
• Selectable HP, LP or Full Range for the internal amplifier and HP or LP for the external output
• Adjustable High-Q Bass EQ (0 to + 12dB) @ 45Hz
• Pulse width Modulated MOSFET Switching Power Supply
• Stable into 1 ohm stereo or 2 ohm mono loads
• Variable input sensitivity (200mV to 2V)
• Thermal Overload Protection
• Superior muting circuitry assures no turn on / off noise
• Optically isolated power supply
• VI limiting circuitry with over-current LED
• Low RFI/EMI design
• Bridgeable Outputs
• Extensive burn-in and QC testing for the ultimate in reliability
• Made in the good ol' USA
http://www.caraudio.com/forum/car-audio-classifieds/487146-%5Bb%5Dphoenix-gold-outlaw-1845-limited-edition%3D%3D%3D%3D%3D%3D%3D%3D%3D%3D-%24799-obo%5B-b%5D.html
Output Power per Channel-Both Channels Driven
4 ohm @ 12/13.8 VDC
M50......50/80 WRMS
M100....100/185 WRMS
2 ohm @ 12/13.8 VDC
M50......100/120 WRMS
M100.....200/230 WRMS
Bridged into 4 ohm @ 13.8 VDC
M50......245 WRMS
M100.....500 WRMS
THD at rated power 4 ohms....0.05%
SMPTE at rated power 4 ohms
Crossover Frequencies
30Hz to 600Hz
Crossover Slopes
12dB per Octave
Bass EQ
0 to + 12dB @ 45Hz
Input Sensitivity
200mV to 2 Volts
Case Dimensions
29.25"L x 10.63"W x 2.0"H
Dimensions with Flanges and Terminal Blocks
29.25"L x 11.63"W x 2.0"H
M100 section:
2 x 100W @ 4 ohms (12.0V)
2 x 185W @ 4 ohms (13.8V)
2 x 200W @ 2 ohms (12.0V)
2 x 230W @ 2 ohms (13.8V)
1 x 500W @ 4 ohms bridged (13.8V)
Fuse: 40A (4 ohms) or 70A (2 ohms)
M50 section:
This is one Badass collectors piece
It's in really great shape, pulled it from my running system about 10 years ago and it has been sitting under my bed in a box ever since.
The Outlaws sold new for about $1500 - 15 years ago.
My Avatar pic is the actual amp.
As for feedback, and more pictures, You can check my feedback rating on Ebay: Item# 130423838717
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=130423838717&ssPageName=STRK:MESELX:IT
View attachment 26520137
The Max Wattage for this Amp if you bridge all the outputs is:
• 745 WRMS @ 4 ohms (13.8V) Or 700 WRMS @ 2 ohms (13.8V)
OUTLAW Specs
• Gold Plated 2 Layer, 2 ounce Copper G10 Glass-Epoxy Printed Circuit Board
• Dual power inputs
• High-Current Triple-Darlington Output Stage design
• Tri-Linear output capacity (simultaneous stereo & bridged mono operation)
• Stereo 12dB per octave, continuously variable crossover from 30 to 500Hz
• Selectable HP, LP or Full Range for the internal amplifier and HP or LP for the external output
• Adjustable High-Q Bass EQ (0 to + 12dB) @ 45Hz
• Pulse width Modulated MOSFET Switching Power Supply
• Stable into 1 ohm stereo or 2 ohm mono loads
• Variable input sensitivity (200mV to 2V)
• Thermal Overload Protection
• Superior muting circuitry assures no turn on / off noise
• Optically isolated power supply
• VI limiting circuitry with over-current LED
• Low RFI/EMI design
• Bridgeable Outputs
• Extensive burn-in and QC testing for the ultimate in reliability
• Made in the good ol' USA
http://www.caraudio.com/forum/car-audio-classifieds/487146-%5Bb%5Dphoenix-gold-outlaw-1845-limited-edition%3D%3D%3D%3D%3D%3D%3D%3D%3D%3D-%24799-obo%5B-b%5D.html
Output Power per Channel-Both Channels Driven
4 ohm @ 12/13.8 VDC
M50......50/80 WRMS
M100....100/185 WRMS
2 ohm @ 12/13.8 VDC
M50......100/120 WRMS
M100.....200/230 WRMS
Bridged into 4 ohm @ 13.8 VDC
M50......245 WRMS
M100.....500 WRMS
THD at rated power 4 ohms....0.05%
SMPTE at rated power 4 ohms
Crossover Frequencies
30Hz to 600Hz
Crossover Slopes
12dB per Octave
Bass EQ
0 to + 12dB @ 45Hz
Input Sensitivity
200mV to 2 Volts
Case Dimensions
29.25"L x 10.63"W x 2.0"H
Dimensions with Flanges and Terminal Blocks
29.25"L x 11.63"W x 2.0"H
M100 section:
2 x 100W @ 4 ohms (12.0V)
2 x 185W @ 4 ohms (13.8V)
2 x 200W @ 2 ohms (12.0V)
2 x 230W @ 2 ohms (13.8V)
1 x 500W @ 4 ohms bridged (13.8V)
Fuse: 40A (4 ohms) or 70A (2 ohms)
M50 section:
Last edited by a moderator: