Phoenix Gold for Comp VR's?

[NeroInferno 10+ year member]

Alright so I've just been askin around cuz i want the right amp to power these subs but what about this Phoenix Gold amp, i was thinking of getting two of these, one to power each of the Comp VR Kicker 15's i bought...what do you think? too much power or not enough or just right or what? For the specs on the subs go to kicker.com and look for the comp vr's and select specs...let me know because i need to get these amps so i can get this system in...

CLICK HERE TO VIEW THE SPECS

Click to read more...

 

[pjvoc 10+ year member]

make sure u wire the cvrs at 2 ohms, look in the manual and itll tell u, you will get tons more out of each sub, comp cvrs are so nice cause they can handel all types of shit, get 2 of those amps tho, the 15s are very powerful i have the 12s and they rock S***

 

[Cbass 10+ year member]

you can get a pg xenon 600.1 for the same price on ebay... much better amp than the octane-r... and is underrated most birthsheets show about 800wrms.

If you are going to get pg get xenon not octane-r.

IMO

 

[Savstyle 10+ year member]

you would be better off finding 1 bigger amp instead of 2 smaller ones. Be much simpler IMO

 

[NeroInferno 10+ year member]

well i was still thinkin gettin two of the pg octane-r's unless someone can recommend me a good 2-channel amp that can power both of these 15's...

 

[psych0ticnemes1 5,000+ posts]

get two xenon 600.1's... i'll give you mine for less than 200 shipped

does it's power at 1,2 or 4 ohms... so it wouldn't matter how you wired the cvr's

 

[NeroInferno 10+ year member]

The CVR's are supposed to be ran at 2 ohms so yeah, if you can send me some pictures or post sum up I would definitely be interested because $200 is what i was hoping to spend so let me know...