jerod187
Banned
hey guys i have a 08 XXX 12" that i need a box design for it will be powered by my MD3D and i mainly listen to rap sometimes rock so i want kinda of SQL mix with like 60%SPL and 40% SQ.
I was told to Use 1 inch MDF for your box with a port that is 33 square inches on the opening and 30 inches long to tune that beast at 33 Hz and have the box about 2.5 cubic feet internal volume? any suggestions on box size or tuning is appreciated
i will paypal some one 10 dollars if they design a box and include a cut sheet, my dimensions are
Hieght: 15"
Depth: 22"
Width: 33"
also if possible id prefer the depth to be as little as possible so try and maximize on the width and hieght and only go as deep as needed ,
Thanks alot in advance,
Jeremy
I was told to Use 1 inch MDF for your box with a port that is 33 square inches on the opening and 30 inches long to tune that beast at 33 Hz and have the box about 2.5 cubic feet internal volume? any suggestions on box size or tuning is appreciated
i will paypal some one 10 dollars if they design a box and include a cut sheet, my dimensions are
Hieght: 15"
Depth: 22"
Width: 33"
also if possible id prefer the depth to be as little as possible so try and maximize on the width and hieght and only go as deep as needed ,
Thanks alot in advance,
Jeremy
