Paying for box design.

[alex5857 10+ year member]

Vitveet: been trying to get a hold of you but your inbox is full and i need this design asap.

so anyone interested read below.

want the front the look like this:

http://cgi.ebay.com/ebaymotors/Ford-Mustang-94-04%27-Sub-Subwoofer-Box-Enclosure-2x12%22_W0QQitemZ250293628611QQcmdZViewItem

however this is only for a single 12" sub and i want it ported tuned to ~31hz, 2-2.3cubes. Its gonna be a in-trunk build.

let me know if you dont understand my measurements.

14" Tall at the front of the box, 7" Tall at the back, and for the first 6" there is no slant yet.

16" Deep

42" Wide

These are Max dimensions. let me know if they are confusing. and the sub incase your curious is a 12" RL-P

Click to read more...

 

[KyleBechtold 5,000+ posts]

when the slant starts how sharp is it? 42 is for the full front baffle? you want it ported towards the trunk i assume and then hopefully opening a hole in the rear deck

 

[KyleBechtold 5,000+ posts]

you need to list the sub to for proper specs.. also 16" depth is the max you want? will that clear the trunk bars?

 

[alex5857 10+ year member]

The slant is about a half inch per inch.

The sub is listed at the bottom of the first post, but its and RL-P

this is going in a 2000 convertible mustang.

16" is the max, as in that's as deep as i want the box or it wont be flush with the trunk.

42" is not including the font baffle, that's 42" usable area.

sorry if it wasn't clear. let me know if you have any other questions. ill be heading to bed soon and will get back to you in the morning.

 

[treadburner 10+ year member]

y not build a regular box an make a template for the box to fit plush with the car

 

[alex5857 10+ year member]

^ yes thats what i want.