Ok, so what pac unit is needed for a 2007 Tahoe with factory nav and all the bells and whistles. I was told PAC C2R-GM29 but it seems to only have one male to female connector and the car has 4 harnesses on the back. So what do I need to get?
Just checked it out. Im looking for something plug and play.Have u looked at Axxess Interface - Steering Wheel Control, that may work better for u
I cannot see a photo here is what it looks like. http://image.fourwheeler.com/f/eventcoverage/8901998+w799+h499+cr1+ar0/129_0601_06la_09z%2b2007_chevrolet_tahoe%2bdashboard_view.jpgMore info on what kind of radio and stuff you have.. Nav? Below is the standard pac for bose and nav and for non nav I think.
PAC RP4-GM31 Factory Integration Adapter Connect a new car stereo and retain steering wheel controls, safety warning chimes, rear seat video, and Bose® amp in select 2006-up GM vehicles at Crutchfield.com
I have a AOEM-GM1416 now and was told it wouldn't work. So will the one I have now work? I also have a LOC I could use.I am sure the model u looked at will work, BC when I was looking for a harness for my car, the harness looked nothing like my stock but when got it, it fit
This is for nav so this would be the pac you would want. I don't think they have the nav without the bose so..More info on what kind of radio and stuff you have.. Nav? Below is the standard pac for bose and nav and for non nav I think.
PAC RP4-GM31 Factory Integration Adapter Connect a new car stereo and retain steering wheel controls, safety warning chimes, rear seat video, and Bose® amp in select 2006-up GM vehicles at Crutchfield.com