output on a bamf-2000d

[sweenster123 10+ year member]

what is the actual output. it says 2000 rms but i know thats bs.//content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

Click to read more...

 

[528hz 10+ year member]

Does that amp stand for Bad *** Mother Fvcker?

 

[sweenster123 10+ year member]

i dunno. its far from it. i took it as a trade and some cash for a crossfire 1400d just curious to hear what a pos it is.

 

[gunz4me 10+ year member]

I think in the case of Epsilon Electronics, Inc. and Power Akoustik, it means: Brothers Associated Moving Forward //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

I still can't wait to see what they do to the PPI brand:crap:

 

[sweenster123 10+ year member]

Does that amp stand for Bad *** Mother Fvcker?

should say pos2000d //content.invisioncic.com/y282845/emoticons/crying.gif.ec0ebefe590df0251476573bc49e46d8.gif

 

[uptwome2007 10+ year member]

i don't know about the 2000d but, i've done alot of testing with the 5500d and the most i could get out of it was about 2500 watts and that was with a 15.7dc voltage drop.

 

[sweenster123 10+ year member]

i don't know about the 2000d but, i've done alot of testing with the 5500d and the most i could get out of it was about 2500 watts and that was with a 15.7dc voltage drop.

i havent even fooled with it. if i were to guess id say about 900@1ohm at 14v but i didnt know if anyone messed with one at all.

 

[01 S 10 10+ year member]

cut the RMS in half, given the average voltage drop, thats all you'll get. unless your running 15V-16V+

 

[sweenster123 10+ year member]

cut the RMS in half, given the average voltage drop, thats all you'll get. unless your running 15V-16V+

its actually rated at 1200 rms @ 1ohm according to the site. so 600?

 

[528hz 10+ year member]

should say pos2000d //content.invisioncic.com/y282845/emoticons/crying.gif.ec0ebefe590df0251476573bc49e46d8.gif

//content.invisioncic.com/y282845/emoticons/hilarious.gif.02a037aad04aa96f19982b298a3d70a8.gif

 

[sweenster123 10+ year member]

//content.invisioncic.com/y282845/emoticons/hilarious.gif.02a037aad04aa96f19982b298a3d70a8.gif

whats your opinion on crossfire amps?

 

[gunz4me 10+ year member]

whats your opinion on crossfire amps?

My Crossfire BMF-1000d benched at around 1250 watts RMS @ 1 ohm, so I will say the Crossfire does at least rated power

 

[sweenster123 10+ year member]

My Crossfire BMF-1000d benched at around 1250 watts RMS @ 1 ohm, so I will say the Crossfire does at least rated power

they draw like a mofo tho. i had a 1400d the 2007 2008 model and it was the most powerhungry amp ive had.

 

[gunz4me 10+ year member]

they draw like a mofo tho. i had a 1400d the 2007 2008 model and it was the most powerhungry amp ive had.

I'll agree to that! I think my Crossfire pulled more average current at 1 ohm than my Class AB Rockford Fosgate 25 to Life Punch 150 does at 4 ohms. Granted the Punch 150 is between 900 and 1000 watts RMS....

Then again, so much for Class D being more efficient and making more power while drawing less current. Current draw is current draw no matter what the topology your power amplifier happens to be.

 

[sweenster123 10+ year member]

I'll agree to that! I think my Crossfire pulled more average current at 1 ohm than my Class AB Rockford Fosgate 25 to Life Punch 150 does at 4 ohms. Granted the Punch 150 is between 900 and 1000 watts RMS....
Then again, so much for Class D being more efficient and making more power while drawing less current. Current draw is current draw no matter what the topology your power amplifier happens to be.

thats one thing about my us amps md3d. it was fine at 2 ohm but now im below 1 ohm and it draws horribly. puts out some power tho.