GreenSmoke
Junior Member
I hooked a rearview camera up and would like to make it turn on and off as I please with also having the reverse controls applied. Can anyone help with this? I have a p71.
On/off switch for rearview camera
- Thread starter GreenSmoke
- Start date
- Replies 1
- Views 493
-
2Participant count
-
Participant list
tommydh 10+ year member
CarAudio.com Elite
the best advice I can gicve is to run it through a relay where either source would close the coil to energize the cam. since it would be using 2 seperate 12v sources 1) the rear tail light, 2) the switch you control. the other thing I can think of is 3 way switching as in a house where you can turn on and off from 2 or more locations.
Activity
No one is currently typing a reply...
Similar threads
It would also be easy to add an equalizer to have individual rca inputs for all of the channels. A decent one can be had for less than $40...
- Started by RyanJ0022
- General Car Audio
Any
indication that a loose wire may be the issue? I'd start by checking all the +/- connections to see if one has come lose or is starting to...
- Started by brandofamily
- Head Units
Disconnect the RCA's or hi-level input to the JBl amp. turn the system on, If the noise continues, it's a ground or noise issue with the amp.If it...
- Started by oldAlpine
- Wiring, Electrical & Installation
yall. I unplugged the radio harness and the antenna and plugged it all back in and it works. I guess its fixed… suppose it was the head unit...
- Started by Corrigan Zeman
- Wiring, Electrical & Installation
Thank you all for all the replies, I intend to reply to each and every one individually as I test things out.
Here's the latest development that...
- Started by nola111
- Wiring, Electrical & Installation
About this thread
New threads
-
-
What type and placement of box for dual 8 or 10" shallow depth subs for 2011 Hyundai Veracruz?
- Started by kanihoncho
- Replies: 2
-
-
-