ok got a good one for box designers will pay$$

[yamaman 10+ year member]

Hey there ok I was told that no one will do it for free that is totally understandable. Ok I am tihnking this is going to be a pretty tricky deisgn. I have a 2001 Ford F-150 regular cab. Now I also have 2 12" kicker solo-baric L7's I want to put these behind my seats without losing to much room. I am tihnking I would like to get around 1.25 cubes of air space each. and I want the box the be sealed. I also want a separate box for each sub. I am also wanting to use fiberglass for the construction of this box. So does anyone think they can tackle such a project if so just let me know. and if you need any more info just let me know... thanx for your time I hope I have given enough info. also plz let me know what you charge to do such plans thanx a bundle

Click to read more...

 

[_DjScrew_ 5,000+ posts]

i recommend bcarpenterfhl .. that is his aim name also.

 

[yamaman 10+ year member]

alrighty thanx for the recommendation man although I do not have AIM. i will see if I can get in contact with him

 

[tRiGgEr 5,000+ posts]

Building you a box and including fiberglass in to the install, is quite the project. You would be better off finding some one loacally to help you out. As they will need hands on time with your car.

Just a thought.

 

[yamaman 10+ year member]

oh I didn't realize that and there is no one anywhere within 4 hours that does fiberglass. I live In a small town up in Canada so help is hard to get too

 

[tRiGgEr 5,000+ posts]

There are a lot of DIY's on the internet. Try to give most of them a read. See if this is something you could learn to do and give it a go. Self achievement>all IMHO.

 

[yamaman 10+ year member]

I tihnk I have read almost all the diy's twice haha. I am confident I can build it myself. I just don't have any talent to draw out plans or anything so I would pretty well be doing it as I go and I would like something to reference off of.

 

[tRiGgEr 5,000+ posts]

If you can get a rough draft of the design and measuments you have in mind, I'm sure someone here can look over them and give some pointers. Try to come up with a rough draft of your ideas and post it

 

[80INCHES 5,000+ posts]

do u have to do fiberglass

its a time consuming job and it get alittle messy

80

 

[bcarpenterfhl 10+ year member]

i think jellyfish420 did a really nice glass job for a pick up. he used re 8s i believed. with fiberglass theres really no way i can help you out as far as plans. But people, including myself, would be more than happy to offer advice/help/tips on fiberglassing.

 

[yamaman 10+ year member]

I can't even do up rough drafts I have got to be the worst artist in the world I sat down for a day trying to draw something up but I have no luck at all.

80 no I don't have to use fiberglass but i was tihnking bout using it so I can use every possible inch of room I got because I know it is going to be very hard to fit these puppies in there

 

[yamaman 10+ year member]

alright then b thanx I am not surprised that you can't make plans without have the truck there and stuff. as for the offer on advice and stuff that will be awesome. I am sure I will be coming back for help once I start getting everything together. thanx again man

 

[crhye250r 10+ year member]

When you get ready to start glassing or building the box, I would be happy to help you in any way. Throw some questions my way if I can help at all.

 

[yamaman 10+ year member]

thanx for the offers guys I will more than likely use them haha

 

[yamaman 10+ year member]

alrighty I was told not to have the subs somewhat facing each other. I was going to do a design like this box here before. Are these facing each other to much?? r what r your opinions and improvemtns and suggestion that can be made to this box. thanx everyone

sorry file to large I will try to resize it