Official CarAudio.com Big 3 Thread

[taintedplay 10+ year member]

sorry if this has been asked, or since its really dumb, but whats the difference between teh chassis and the frame, and which is it better to attach to?

 

[jaytoofly 10+ year member]

i believe the chassis is the lower main part usually where all the suspension and motor and ****** bolt on to and frame involve upper construction but i may be wrong. i think grounding to either would be the same if shave down to bare metal

edit- i did a search on google pictures and got similar pictures for both which leads me to believe its the same thing.

 

[smoka 10+ year member]

chasis = frame (not to be confused with engine ground)

 

[jaytoofly 10+ year member]

I know my battery grounds to the frame but there's also another wire going to the engine is this the engine ground? How likely is the engine to be grounded to the battery's ground?

 

[thieves 10+ year member]

pretty likely

 

[jco1385 5,000+ posts]

seeing as in a lot of cases the starter only gets a POS feed and an "engage" wire, it has to use the engine block/***** as the ground for it's circuit. so that being the case, you will more than likely have a stock engine to battery ground. what you need to do for the big 3 is ADD a bigger wire to do the same thing.

 

[jaytoofly 10+ year member]

If I add bigger wire can I ground it at the same exact place?

 

[jco1385 5,000+ posts]

yes, make sure it's clean of dirt, grease, paint or whatever. you want metal to metal.

 

[kotag]

Finally I got my problem solved!!!!!

It turn's out that my car has a weird protection system built in that doesn't allow the alt to be grounded directly to the chassis, frame or neg bat post... so i had to upgrade my ground from engine to chassis and voila.

Now ready to the next step... putting all the components into the car... 2 days more of work and ready to enjoy the weekend!!!!

 

[jco1385 5,000+ posts]

//content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

what car?

 

[kotag]

It's a Ford Fiesta 2008 they don't sell them in the USA yet... But here in MX it's very popular

 

[jco1385 5,000+ posts]

how does the alt put out power w/o a complete circuit? a sure as hell cant think of a way that could possibly work

EDIT:

actually, if the alt case is metal, and the engine/alt bracket is metal... then the alt case = the engine (electrically). so engine to chassis = alt case to chassis (electrically)

 

[jaytoofly 10+ year member]

would the big 3 still be efficient if i replaced the batt to engine ground with 0awg and added another 0awg? same for motor to chassis replace the stock ground with 0awg then add another 0awg wire?

 

[jco1385 5,000+ posts]

why would you do that? thats super duper ooper oober overkill

 

[jaytoofly 10+ year member]

why would you do that? thats super duper ooper oober overkill

Is that bad? Lol I'm gonna have extra wire left over and my those wires look old and I figure why not?