Not as Loud as I expected....

[subboxmaker 10+ year member]

so has he figred out whats wrong or not?

 

[Below 30 10+ year member]

You guys did your part and admit the diagram isn't accurate. I'll do my part and say I used the incorrect word to call it wrong. The fact is this, if you guys claim a 5 year old can do it, why doesnt RF draw it accurate.

If you guys believe its good as it is, you contradict yourselves about the ease of it. If RF thought 5 year olds could do it, they would draw the wires criss-cross. You guess should admit the contradiction.

No I wasnt at his house, but was charles. If not, then what was your point of mentioning that.

 

[Ricktc 10+ year member]

honestly u guys, please just ignore below30. The more u reply to his comments the more hes gona reply back. hes oubviously not gona leave so just ignore him. Back on topic. The thread starter, ive helped him out alot and he seems to have everything done right. Someone posted something about the sensitivity of the gain and i think that would be helpful to check that out. He has new RCa's so that cant be the problem. My other thought is just the Head unit...

Maybe he wasn't, good point I suppose, BUT, he did verify to the best of his and our knowledge everything is correct, so, once again, your point is moot.

 

[Ricktc 10+ year member]

Grab a multimeter, measure resistance at the amplifier ... Debate = over

LOL, no doubt, I consider this debate over, myself.

 

[Wonderbread 5,000+ posts]

Wow, an argument over nothing.

Literally, nothing. The diagram may be *altered* to make it easier to follow, but the fact of the matter is this - the wiring is correct if you go by polarity, not by the pretty picture. However, if pretty pictures and red a black lines confuse you, maybe you shouldn't be playing with electricity.

Just a thought.

 

[tRiGgEr 5,000+ posts]

**** your an idiot

Call Rockford Fosgate let them know the error you found and none of there techs found and come back here and tell us how much they laughed at you.

 

[iceteebone 5,000+ posts]

Wow, an argument over nothing.Literally, nothing. The diagram may be *altered* to make it easier to follow, but the fact of the matter is this - the wiring is correct if you go by polarity, not by the pretty picture. However, if pretty pictures and red a black lines confuse you, maybe you shouldn't be playing with electricity.

Just a thought.

think again he should play with electricity. he should take an exstension cord cut it and split it apart and wrap a piece of wire on each finger but he must make sure it's on opposite hands or it won't work and put his fingers in water and plug the cord in the wall. yea this dumb but who ever said i was brilliant?

 

[DBfan187 5,000+ posts]

It is sad to say that Below 30 makes icteebone look/sound smart! Atleast t-bone knows what he is talking about, Hm?

**** your an idiot

We've all come to this conclusion already!

Call Rockford Fosgate let them know the error you found and none of there techs found and come back here and tell us how much they laughed at you.

There is really no need to call. He told us and were already laughing at him.

 

[iceteebone 5,000+ posts]

It is sad to say that Below 30 makes icteebone look/sound smart! Atleast t-bone knows what he is talking about, Hm?

We've all come to this conclusion already!

There is really no need to call. He told us and were already laughing at him.

yes i do know what i'm talking about. i did it before except when i plugged the cord in the wall the positive were on the wrong side so i didn't get fried.

 

[tommyk90 5,000+ posts]

HERE BELOW 30!!!!! HERE'S THE RIGHT F*CKING DIAGRAM. NOW SHUT THE F*CK UP AND QUIT MAKING ARGUMENTS IN EVERY THREAD YOU POST IN YOU STUPID F*CK.

 

[allyourblood 10+ year member]

lol. nice! below30, are you happy now?

abe m.

 

[DBfan187 5,000+ posts]

I confused! Am I supposed to connect the red and black wires together where they crossed? How come the polaritys aren't on the same side? I'm stumped!

lol. j/k Below 30=IDIOT!

 

[ssj2xxgotenxx 10+ year member]

Hmm wow this thread really exploaded, I didn't have time to reply to your answers b/c I was really busy lately. Sorry for the unanswered replys but thanks for all your help; ok back to the matter The voice coils on the Kickers are accually different from the fosgates and other subs because they are located differently. Like So....

 

[ssj2xxgotenxx 10+ year member]

Hmm wow this thread really exploaded, I didn't have time to reply to your answers b/c I was really busy lately. Sorry for the unanswered replys but thanks for all your help; ok back to the matter The voice coils on the Kickers are accually different from the fosgates and other subs because they are located differently. Like So....

+

- -

+

So go easy on below 30 he had good intents on helping me =) But I have the negitives and positives wired together and linked the subs wired in parallel. And my gains is set to 2 volts to match my HU. You guys think i should turn the volume up higher on the HU and turn the bass boost down a little so I can get it louder without distortion/clipping?

 

[ssj2xxgotenxx 10+ year member]

When I turn the bass boost down on amp/HU a get little to no response? Would it be good if I put my gains up that high?