Alright, so I removed my stock HU today, got the wire harness on and hooked it all up to the alpine that's been sitting in my room. Came to turn it on and nothing (the HU works, I tested it prior to this)
I pulled all the connections apart for the harness, went online and looked up wire guides for both my vehicle (97 pathfinder) and the HU (alpine ida-x200). Still no luck.
I had removed the negative terminal on the battery so there shouldn't have been any blown fuses, but I checked just in case. In the fuse box, I have 2 audio fuses. Both look completely fine.
Finally I decided to see what exactly my problem was. Tested the power wires coming out of the harness with a DMM and they all read 0v. Some wires in the harness are still getting power, however. For example, I shorted the wire that raises the antenna and that worked.
Any suggestions? //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif
I pulled all the connections apart for the harness, went online and looked up wire guides for both my vehicle (97 pathfinder) and the HU (alpine ida-x200). Still no luck.
I had removed the negative terminal on the battery so there shouldn't have been any blown fuses, but I checked just in case. In the fuse box, I have 2 audio fuses. Both look completely fine.
Finally I decided to see what exactly my problem was. Tested the power wires coming out of the harness with a DMM and they all read 0v. Some wires in the harness are still getting power, however. For example, I shorted the wire that raises the antenna and that worked.
Any suggestions? //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif