new project has commenced

[PV Audio 5,000+ posts]

Depending on how much the ole man wants me to work from next wednseday till the following monday, I bet I can get them done, I bet I can get the construction done by the time break is over, I plan on making it out of walnut... I'm positive my grandpa would sell me some, we only got a few thousand board feet lying around in 1" pieces. I might not have the drivers in time, but I bet I can get the cabinets done.
All it is is a long box with a hole at one end, wire running up to it, and a base... With a bunch of stuffing.

Right??

-Ryan

i dunno, ask swc. he seems to be the expert //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[ballstothewall 10+ year member]

Alright, I will get this thing done over thanksgiving if i start it. It will happen, (provided I start....lol) The construction will get done, the finish, I'm not to sure i cound do that since our wood shop isn't heated.

 

[swc204 10+ year member]

ok then. i'll bet you 20 dollars paypal that you can't have a presentable loudspeaker (this one) from plywood in 3 days. up for it?

i dont have the drivers, the wood.....i could do it i just dont have a need for a box and no speakers.

 

[swc204 10+ year member]

i dunno, ask swc. he seems to be the expert //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

easy lemans. i was just saying it shouldnt take a week to do that project

 

[PV Audio 5,000+ posts]

Alright, I will get this thing done over thanksgiving if i start it. It will happen, (provided I start....lol) The construction will get done, the finish, I'm not to sure i cound do that since our wood shop isn't heated.

oh i have faith that you can have the enclosures at least partially completed in 3 days, but unless you have telekinetic shipping and the hands of atlas as clamps, its gonna be hard to get the parts in within 3 days and be able to clamp down the panels. let alone you need a good 6-8 hours + sanding for each of the 3-4 coats of the oil.

 

[ballstothewall 10+ year member]

HOly hours of sanding Batman.... Don't you use power tools? Sanding dosen't take that long to get a smoooooth finish. The only thing that I would need shipped is the drivers form partsexpress. The rest we have at home or I could pick up from my former wood shop teacher.

 

[PV Audio 5,000+ posts]

HOly hours of sanding Batman.... Don't you use power tools? Sanding dosen't take that long to get a smoooooth finish. The only thing that I would need shipped is the drivers form partsexpress. The rest we have at home or I could pick up from my former wood shop teacher.

you don't power sand the finish i hope..............

 

[ballstothewall 10+ year member]

Oh lord no, not the finish....

 

[PV Audio 5,000+ posts]

Oh lord no, not the finish....

*wipes brow* //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[ballstothewall 10+ year member]

For the values on the SNF... Did you get

3.374 mF (mF is Micro Farads isn't it...and isn't 10^-4 micro?)

.0062H (inductance is Henries isn't it?)

7.35 ohm

 

[PV Audio 5,000+ posts]

For the values on the SNF... Did you get
3.374 mF (mF is Micro Farads isn't it...and isn't 10^-4 micro?)

.0062H (inductance is Henries isn't it?)

7.35 ohm

hmm i had 3.3 microfarads (uF, micro is 10^-6)

.7 mH

and a 7 ohm non inductive resistor

 

[ballstothewall 10+ year member]

Ahhh....Thanks, my electronics is a little rusty.

 

[PV Audio 5,000+ posts]

tsk tsk tsk //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[ballstothewall 10+ year member]

Me thinks a trip to radio shack is in order once that **** money order gets here....

 

[PV Audio 5,000+ posts]

they sell aircore inductors and shit there?