new project has commenced

[jaygeorge1979 10+ year member]

ok so i tried the danish oil on my brace before cutting it........oh my god. this was the BIGGEST waste of money EVER. perhaps it is because i got the golden oak type, but it is NOT rich at all, just looks dry as hell. i need a new stain, cause the color looks so much like the regular wood it isn't funny. any suggestions on DEEP stains (mahogany?) ?
while you're thinking about that, a teaser pic (no danish oil on this) //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

could someone tell me what i am looking at in this picture? i dont get it:banghead:

 

[ballstothewall 10+ year member]

Looks to me like the base with one of the legs attached.

 

[ngsm13 5,000+ posts]

Took me along time to make those, many rings had to be routed, aligned,glued, clamped, then the roundover. I made 2 ports, the one with flange

for the outside of the box and the other port for the other side of the tube

with no flange. I think I made 20 of them total. I will be using 16 of them

for my project, 4 spares.

Still...if you could put a price on 2...

NG

 

[PV Audio 5,000+ posts]

could someone tell me what i am looking at in this picture? i dont get it:banghead:

the spike //content.invisioncic.com/y282845/emoticons/up2something.gif.dd110ecf3ae4b76050d87598f2f8de7c.gif

 

[ballstothewall 10+ year member]

Where did you get them...that looks pretty dang cool!

 

[PV Audio 5,000+ posts]

whoa! vikash is readin this thread! didn't know he was a member...badass!

 

[PV Audio 5,000+ posts]

Where did you get them...that looks pretty dang cool!

parts express. they are the dayton b-stock, somethin like 10 bucks less than normal.

 

[ballstothewall 10+ year member]

sweet...Thanks

 

[Vikash]

whoa! vikash is readin this thread! didn't know he was a member...badass!

//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

and in the spirit of it being a caraudio forum, here's my install: http://www.vikash.info/fto/gallery

 

[PV Audio 5,000+ posts]

tight stuff, we need all the knowledge we can get lol //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[PV Audio 5,000+ posts]

since you are here, i might as well ask you. how did you figure out the SNF values for ur project? (i posted this at diy but i didn't get what i was lookin for)

 

[Vikash]

My implementation was based on the same enclosure volume and baffle width as John Krutke's original design, so the notch was the same.

 

[PV Audio 5,000+ posts]

My implementation was based on the same enclosure volume and baffle width as John Krutke's original design, so the notch was the same.

Link perchance?

//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Vikash]

He is the master. Check out his more recent work too.

http://www.zaphaudio.com/archives.html

 

[PV Audio 5,000+ posts]

thanks, i owe u one (50+ lol)