whammie
10+ year member
Junior Member
I enlisted the help of a few friends from Higher Standards in Richmond, KY to help with the load. The car was going to Miami in for Hot Import Nights so we've been working on this for a while...
I wanted to wait till we actually had something to show before I posted anything so here it is. Enjoy.
THE BREAKDOWN:
1. The stock rear strut tower bar was removed (plama cutter) and a new tubular one was contructed
2. We built 3 pieces from 1/2" MDF that will house all the speakers and nitrous bottles and wedge each other into the trunk. Our goal was to tub out the hatch with fiberglass in as few pieces as possible so it doesn't look cluttered with seams and that way it will all be painted and there are no beauty panels...
3. We will be using...
1-Rockford Fosgate PUNCH P3 12"
2-Rockford Fosgate PUNCH P3 8"
4-Rockford Fosgate PUNCH 6 1/2" coaxials
1-Rockford Fosgate PUNCH P8004 4-channel amp
2-Rockford Fosgate PUNCH P8002 2-channel amp
1-Rockford Fosgate 1 farad cap
Rockford Fosgate wiring and distribution
2-Nitrous Express Composite carbon fiber 12lb bottles
All of this equipment except for the 6 1/2" were used in the previous stereo but I just wanted to out do what we did this past year.
This piece doesn;t make much sense now but once glassed it will hold the cap in between the seats and it is an extention of the 12 enclosure
Here is are some good shots with just the "skeleton" structure
Our first layer of resin...
Out of the car for the cloth...
Back in the car...
I wanted to wait till we actually had something to show before I posted anything so here it is. Enjoy.
THE BREAKDOWN:
1. The stock rear strut tower bar was removed (plama cutter) and a new tubular one was contructed
2. We built 3 pieces from 1/2" MDF that will house all the speakers and nitrous bottles and wedge each other into the trunk. Our goal was to tub out the hatch with fiberglass in as few pieces as possible so it doesn't look cluttered with seams and that way it will all be painted and there are no beauty panels...
3. We will be using...
1-Rockford Fosgate PUNCH P3 12"
2-Rockford Fosgate PUNCH P3 8"
4-Rockford Fosgate PUNCH 6 1/2" coaxials
1-Rockford Fosgate PUNCH P8004 4-channel amp
2-Rockford Fosgate PUNCH P8002 2-channel amp
1-Rockford Fosgate 1 farad cap
Rockford Fosgate wiring and distribution
2-Nitrous Express Composite carbon fiber 12lb bottles
All of this equipment except for the 6 1/2" were used in the previous stereo but I just wanted to out do what we did this past year.
This piece doesn;t make much sense now but once glassed it will hold the cap in between the seats and it is an extention of the 12 enclosure

Here is are some good shots with just the "skeleton" structure



Our first layer of resin...

Out of the car for the cloth...

Back in the car...


