I wanted to play around with some new router bits and get some large pieces of wood cleared out of the garage at my dad's request, so I built a few enclosures yesterday and today.
I may decide to keep the single 8" box for a home sub, but if not, the two remaining (see pics) will both be up FS once carpeted.
This enclosure is 1.1 cubic feet net. Just slightly larger than RE's spec box for the 8's. It will also work well for most other 8's. Cutout diameter is 7 1/8".
It is tuned to 35 hertz and has 17"^2 of port area. I've tried an identical box to this with RE 8's and it seems to be a pretty solid setup. Tight bass that gets pretty loud.
The port has been routered all the way through to give the rounded edges. Titebond II was used for all joints. 3/4" MDF, of course.
The carpet is a medium-gray.
$70 + shipping
Thanks
I may decide to keep the single 8" box for a home sub, but if not, the two remaining (see pics) will both be up FS once carpeted.
This enclosure is 1.1 cubic feet net. Just slightly larger than RE's spec box for the 8's. It will also work well for most other 8's. Cutout diameter is 7 1/8".
It is tuned to 35 hertz and has 17"^2 of port area. I've tried an identical box to this with RE 8's and it seems to be a pretty solid setup. Tight bass that gets pretty loud.
The port has been routered all the way through to give the rounded edges. Titebond II was used for all joints. 3/4" MDF, of course.
The carpet is a medium-gray.
$70 + shipping
Thanks
