New CDT 3 way Components

[wanderer1]

Item(s) for Sale: Pair of EU-6Woofers. Pair of HD-3 Mid. Pair of TW-25 silk dome neo Tweeter. Pair of EX30 3 way X-Overs

Item(s) Description/Condition: EU-6 New with grills 10/10 norm 6.5” cast mid woofer

Technical specs and contents: Woofers Etc.com $159 •Cone: Coated Carbon Reinforced Paper

•Diameter: 6.5" (170mm)

•Sensitivity: 81.65 dB

•Power Handling: 70W RMS (100W Peak)

•Frequency Response: 40 - 1000 Hz

•Nominal Impedance: 4 Ohms

•Voice Coil Diameter: 1.0" (26mm)

•Peak Xmax: 5mm

•Magnet Weight: 20 oz

•Mounting Depth: 2.63" (66.8mm)

•Cutout Diameter: 5.78" (147mm)

•Outer Diameter: 6.63" (168mm

•Free Air Resonance: 43.07 Hz

•Voice Coil DC Resistance: 3.27 Ohms

•Voice Coil Inductance @ 1 kHz: 0.25 mH

•Mechanical Q (Qms): 5.67

•Electrical Q (Qes): 0.937

•Total Q (Qts): 0.804

•Compliance Volume (Vas): 11.1l; 0.392 cu ft

•Moving mass, Diaphragm: 30 Gr

•Motor Force Factor: 5.32Tm

HD-3 - CDT Audio HD Series 3" Midrange Drivers $119 Plus $30 for grills. •Diameter: 3.0 (76mm)

•Sensitivity: 84.9dB

•Power Handling: 30WRMS (50W Pk)

•Frequency Response: 115 ~ 11,000 Hz

•Nominal Impedance: 4 Ohms

•Voice Coil Diameter: 0.8 (20mm)

•Peak Xmax: 5mm

•Magnet Weight: 7.2 Oz

•Surround Rubber

•Frame Cast

•Cone Paper

•Mounting depth: 1.69 (43mm)

•Cutout diameter: 2.90 (73.7mm)

•Outer diameter: 3.70 (94mm)

Decorative Bezel is 4.125

diameter and 0.625 deep

with four 0.175 diameter

mounting holes on 3.375

diameter mounting circle

Thiele-Small Parameters

•Free Air Resonance: 115 Hz

•Voice Coil DC Resistance: 3.1 ohms

•Voice Coil Inductance @ 1 kHz: 0.11 mH

•Mechanical Q (Qms): 2.42

•Electrical Q (Qes): 0.729

•Total Q (Qts): 0.560

•Compliance Volume (Vas): 0.97; 0.034 ft3

•Moving mass, Diaphragm: 3.25 Gr

•Motor Force Factor: 3.16 Tm

TW-25 New 10/10 •1pr 1” silk dome tweeter driver neo charged magnet structure

•1 pr flush mount housing w/hardware

•1 pr angled flush mount ring

•1 pr flat surface mount cup

•1 pr angled surface mount cup

•Cooled by ferro fluid

•Frequency response 1500Hz-20.000Hz

•Impedance 4 Ohm

•Sensitivity: 92.5dB

•Surface and flush mount mounts

•Flush mount hole 1 ¾”

•Flush mount depth ¾”

•Flush cup OD 2 ¼”

EX-30 New $199 10/10 you should read about it on the CDT site •Mid-woofer EQ adjustable

•Tweeter EQ adjustable

•Built-in tweeter protection

Price: $525

Shipping and Miscellaneous Item Information:

$15 for shipping

Item Pictures:

(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

Click to read more...

 

[wanderer1]

tp://i1297.photobucket.com/albums/ag29/oldcadguy/stereo/DSC_0092_zpsuk4u6pil.jpg[/img][/url

 

[wanderer1]

Awesome sound from high end components built by people that want you to have an enjoyable car audio experience. If ya want to throw some power at them and they will bang loud but clear. The motor of the HD-3 barely clears the cutout hole for the driver.

 

[wanderer1]

Looking for a Zapco 1000x4

 

[wanderer1]

Woofers sold. Can get more or you can. Wooferswtc has them for 159. So kit with TW-25. EX-30 3 way x over and HD-3 mids is priced at $325 shipped and paypal.

 

[wanderer1]

For $375 add a pair of new CL-61 mid-woofers. Great sound at a great price

 

[wanderer1]

Got more CL-6Ms and EU 6s. Swap to the CL-6 for more midbass, EU 6 for SQ $500either one, or stay with the CL-61 for a decent driver at a really low price. Will also trade for a Zapco1100.1 Reference DC. RTS

 

[wanderer1]

Quite a setup at what I think is a great price. Very accurate, warm drivers that can pound when asked to

 

[wanderer1]

EU-6 or CL-6M, HD-3, ES-010WD, EX30 crossovers-$400 shipped conus. Helluva front stage for a reasonable price. ALL BNIB

 

[wanderer1]

EU-6 or CL-6M, HD-3, ES-010WD, EX30 crossovers-$400 shipped conus. Helluva front stage for a reasonable price. ALL BNIB

This post was incomplete. The 400 is based on a CL-6 mid. With a EU or 6M its $475

 

[wanderer1]

OKlets get these gone. EU-6 or CL-6M, HD-3, TW25 silk dome and EX30 $450 shipped, all others fees on buyer. Trade for pair of Odyssey Group 65

 

[wanderer1]

OK I'm starting to bleed now lol. $425 or a pair of odyssey 65's. You have got to hears this setup, the accuracy, the authority of the notes, the balance.