new box, how to wire?

[brafferty]

I got a new box that is dual chambered, no terminals on the box, i originally had them hooked up to a mono set up with my single chambered box but can no longer do so since there is a split in the box, how can i do this? they are 2 dual 2 ohm subs at a 2 ohm final

Click to read more...

 

[massivespl]

If ur amps a mono it's internally connected so just hook both woofers up at 4ohm each woofer and ur amp will see a 2ohm load.. Just use 12v woofer wiring diagram or Rockford wiring wizard to wire it up proper.

 

[brafferty]

If ur amps a mono it's internally connected so just hook both woofers up at 4ohm each woofer and ur amp will see a 2ohm load.. Just use 12v woofer wiring diagram or Rockford wiring wizard to wire it up proper.

cool i wasnt sure if i could still get a 2 ohm final, but the amp does have 2 channels, but its advertised with a .1 with confuses me haha, i should be fine to wire through the ports?

 

[massivespl]

Yup

 

[brafferty]

Yup

so to double check this would work if applied to both sides?

https://www.google.com/search?q=wiring+a+single+sub+to+a+2+ohm+final&safe=strict&espv=2&biw=1280&bih=923&tbm=isch&imgil=iccgQVhQIArQ3M%253A%253BTS43Ae89JhWyBM%253Bhttp%25253A%25252F%25252Fknowledge.sonicelectronix.com%25252Ftools%25252Fsubwoofer-wiring%25252F&source=iu&pf=m&fir=iccgQVhQIArQ3M%253A%252CTS43Ae89JhWyBM%252C_&usg=__ky7kqsoPhyweKmRcv_D4Dg2noqQ%3D&ved=0CCkQyjc&ei=e9BkVdy8H8fboATUuIOABg#imgrc=iccgQVhQIArQ3M%253A%3BTS43Ae89JhWyBM%3Bhttp%253A%252F%252Fwww.sonicelectronix.com%252Fproduct%252Fimg%252Fsubwoofer_wiring%252F1_sub_DVC_2_ohm_2ch_bridged.jpg%3Bhttp%253A%252F%252Fknowledge.sonicelectronix.com%252Ftools%252Fsubwoofer-wiring%252F%3B728%3B465

i cant wait to see the difference with this one!

 

[Jepalan]

Your amp does not have two *channels*. It has one channel with two sets of terminals to make it easier to wire multiple subs in parallel. The two (+) terminals are shorted together, the two (-) terminals are shorted together. If you connect a 4-ohm load to one set of terminals and a 4 ohm load to the other set of terminals, then the amp sees a 2 ohm load.

 

[audiobaun 5,000+ posts]

woofer_configurations

2- dvc 2 0hm subs for a final 2 ohm load