need help

[Bumpin97Jeep 10+ year member]

i need help on hooking up an olsen v70f69a indash moniter.. it only has 4 wire out the back, red, yellow, black, green and a set of 2 female plugs and 1 male plug.. i want to wire it to my dvd player.. witht he dvd player only has 3 wires out of it and places to put in things like headphone look alike plugs.. i need help on how to do this and what i need to get..

i have a fm modulator but i don't know if i need it

Click to read more...

 

[Bumpin97Jeep 10+ year member]

this is what the back of the dvd player looks like...

the indash moniter has a red, black, yellow, green wire and a 2 female plugs red and yellow) and 1 male plug (white).. how do i wire them up where they will work..

 

[Bumpin97Jeep 10+ year member]

what do i need to get this to work>>....

heres pics of the indash moniter back:

i also have a phoenix digital fm modulater if that helps any..

 

[Bumpin97Jeep 10+ year member]

the dvd player is a boss dvd-2500

 

[Rich B 5,000+ posts]

DVD video out looks like a 1/8" plug.

The monitor uses a standard RCA input (the yellow one).

You will need a cable the goes from 1/8" (not a stereo plug, mono with just one line on it) to a single RCA and you should be set.

 

[Bumpin97Jeep 10+ year member]

so run one from the dc 12 volt out to the yellow rca on the indash.. i want video and sound.. anyway you can hook a amp to this thing?

 

[Bumpin97Jeep 10+ year member]

how will i do this? can i also hook a amp to this?

 

[Rich B 5,000+ posts]

so run one from the dc 12 volt out to the yellow rca on the indash.. i want video and sound.. anyway you can hook a amp to this thing?

No. (NO!)

Ignore that 12v out jack on the back of your DVD player because your monitor has the wiring on it to wire up seperately to 12v without using that jack.

For the video out to monitor in follow my direction above for the seperate video out hookup.

For the audio, on the back of your DVD player it has a black 1/8" stereo jack (marked L/R) for audio out.

The DVD audio output simply requires a cable with a stereo 1/8" plug on one end (DVD player black audio out) to male RCA plugs on the other end that should plug into an amp's RCA jacks.

You might need a pre-amp (a good indash EQ thats rated for 4v or more would be a cheap way to go) to give an amp enough drive though (Im not familiar with that brand of DVD player), but it shouldnt hurt to try it straight into an amp first if you dont want to spend the money.

 

[mazdakid 5,000+ posts]

whats the little chunk of food? and you should clean your keyboard cuz it helps type better

 

[Bumpin97Jeep 10+ year member]

so what do i need to go buy..