need help with my saz 1500d

[IMOVeCHICKENS! 10+ year member]

trying to wire my l7 dual 2 at 1 ohm and the speaker terminals are different than on my zx1500.1 how do i go about hooking up my 17 15 at 1ohm to the saz1500d?

Click to read more...

 

[IMOVeCHICKENS! 10+ year member]

ok well i hooked up the speakers right but all the setting on the amp are so much more confusing than my old kicker what should i set the "subsonic and the phase" at?

 

[IMOVeCHICKENS! 10+ year member]

any tutorials on how i can set the settings on my amp properly the LPF,gain,subsonic,phase, and bass boost i dont want to blow my l7 15

 

[Cameron_B 10+ year member]

To give more accurate information about subsonic filter Tell us your box configuration....sealed or ported to (x) hz

Phase should be 0 or 180 try both and see which is louder.

LPF should be set to around 60hz

bass boost to 0

set headunit volume to 3/4 and with a small flat-head screwdriver start advancing the gain until you hear a slight noticable distorition.

 

[IMOVeCHICKENS! 10+ year member]

well the box is about 3.5 cubes ported i wish i knew the hertz it was built for me and i never asked >

 

[Cameron_B 10+ year member]

Yes should be fine but if it gets stinky turn it down a notch thats a lot of power for an l7 to hold for long periods of time.

Well if no idea on tuning of box start at 40hz and start the turn downwards until the sub starts flexing a lot and you hear minimal sound at the lowest frequency.

 

[RetroAudioinc 5,000+ posts]

remember what I told yea, thats a lot of power for a L7 I have sent many of them up in smoke.. I got subs and a box that can take that all day if you need one latter.. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[IMOVeCHICKENS! 10+ year member]

well i just bought a multimeter any tips for using this correctly im at a total lost and i dont know shit