need help with my EDEAD

[phsballin4life 10+ year member]

jus got it in 2day and i kno this makes me look kinda like a noob but i have no idea how to go about installin it!!! can sum1 tell me how to correctly put this stuff in? thanks

Click to read more...

 

[BastardKidKris 10+ year member]

is it the mat or liquid?

i wanna try some of the liquid...

 

[ANeonRider 10+ year member]

mat.... peal off the cover on the rear and press it on the surface. Use a roller if need be.

liquid... paint it on, cover up everything you don't want to get painted.

 

[phsballin4life 10+ year member]

its the mat and i pulled off a lil of the back and its not that sticky so i have no idea what to do

 

[BastardKidKris 10+ year member]

make sure the surface is clean

use acitone to clean it really good. then you just lay it on

 

[phsballin4life 10+ year member]

but it dosent feel sticky at all to me???

 

[BastardKidKris 10+ year member]

but it dosent feel sticky at all to me???

oh yea, heat it up with a hair dryer. ittl make it stickier and more flexable

 

[ToyTundra 10+ year member]

but it dosent feel sticky at all to me???

your hands are probably greasy or oily, so you can't feel the stickiness.

 

[Luke (Uof I) 10+ year member]

Clean the surface first, if its not that bad water and paper towels will do. Then just cut the mat into pieces to fit on the surface you're applying it to making sure that the adhesive side is sticking to something. To ensure that it adheres well, use lots of pressure such as a roller and you can also use heat especially if it isn't very warm out. Better to apply more pressure than less, and giving it some heat usually helps too.

- Luke

 

[phsballin4life 10+ year member]

when u do a second layer its ok jus to stack it right?

 

[232Stanger04 10+ year member]

yup hair dryer works wonders!! but watchout heating it up too much cause it will be really hard to remove it lol. I did 2 layers in my cars trunk and it is amazing very solid. Yea basically you just place it right over top of the old, make sure you heat it all up after your apply it all, it will help the final set.

Lol, do you like all the silver coating you get on your hands and fingers when you put it on? Its a pain in the bum bum, but it is really nice stuff

 

[LIGHTBEING 10+ year member]

Hey Guys,

I need to Edead my car too, I have the mat. So a heat gun would be too much heat? A hair dryer will suffice?

 

[Luke (Uof I) 10+ year member]

Hey Guys,
I need to Edead my car too, I have the mat. So a heat gun would be too much heat? A hair dryer will suffice?

A heat gun will work too, that's what I used. Just don't go over board with the heat. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[232Stanger04 10+ year member]

A heat gun will work too, that's what I used. Just don't go over board with the heat. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

x2