Crzy
10+ year member
CarAudio.com Elite
ok so today i helped my buddy fix his system in his saturn SL-1
consists of a pioneer HU, one set of RCA to a amp for 2 10' infinities and 4 sets of 6.5 coax audiobahns in rear deck and doors. also he added a coaxle 2.5 or 3 something of that sot inc in the center console (one on each side)
he had his power wire just strung on side of car not under carpet and the wires for the center console speakers and RCA and amp turnon were run through the middle of hte car to the trunk
so we put power wire under the carpet and we put the rca speaker and amp turnon under the carpet in the middle of the car and ran it to the trunk. now we braided or twisted the 2 speaker wires and the amp turnon together not the rca that was separate and ran it that way
also his xover on his rear speaker had broken in half (only a small board with 2 caps or something on it) so i tryed to fix it for him. scraped off the covering on the board and re soldered the tinsels together. re wired the rear speaker with fixed crossover and hooked amp and subs back up
now here is the weird thing, we turn ont he radio and all we get is static and distortion at low volums. the rca didnt work either. so we turned it off quickly and i cut out the fixed xover thinking it was the prob. well it wasnt it still makes the noise and RCA doesnt work. so i did something dumb. i popped my pioneer hu in to see if it was his hu. the xover was uninstalled still so his drivers side rear stage would not work but that didnt matter we wanted to see if noise was gone and rca worked. well on my hu the volum had to go higher to get the noise and the rca's would also not work
what the hell is going on? i can not figure it out for the life of me
consists of a pioneer HU, one set of RCA to a amp for 2 10' infinities and 4 sets of 6.5 coax audiobahns in rear deck and doors. also he added a coaxle 2.5 or 3 something of that sot inc in the center console (one on each side)
he had his power wire just strung on side of car not under carpet and the wires for the center console speakers and RCA and amp turnon were run through the middle of hte car to the trunk
so we put power wire under the carpet and we put the rca speaker and amp turnon under the carpet in the middle of the car and ran it to the trunk. now we braided or twisted the 2 speaker wires and the amp turnon together not the rca that was separate and ran it that way
also his xover on his rear speaker had broken in half (only a small board with 2 caps or something on it) so i tryed to fix it for him. scraped off the covering on the board and re soldered the tinsels together. re wired the rear speaker with fixed crossover and hooked amp and subs back up
now here is the weird thing, we turn ont he radio and all we get is static and distortion at low volums. the rca didnt work either. so we turned it off quickly and i cut out the fixed xover thinking it was the prob. well it wasnt it still makes the noise and RCA doesnt work. so i did something dumb. i popped my pioneer hu in to see if it was his hu. the xover was uninstalled still so his drivers side rear stage would not work but that didnt matter we wanted to see if noise was gone and rca worked. well on my hu the volum had to go higher to get the noise and the rca's would also not work
what the hell is going on? i can not figure it out for the life of me
