I'm trying to design a sealed enclosure for a CDT EF-8. 8" subwoofer.
Smaller the better, but doesn't need to be ridiculously small or anything. I'm messing around wind WinISD but I keep getting an error message on inconsistent data. Can someone help me out?
frequency response 35-1000hz
RMSE-free .92 ohms
FS 42.23 HZ
RE 3.62 ohms (dc)
RES 54.87 ohms
Qms 5.21
Qes .34
Qts .32
L1 1.53 mH
L2 1.91 MH
R2 4.39 ohms
RMSE-load
Vas(sd) 21.17 liters
Mms(sd) 45.21 grams
Cms(sd) 314 yM-Newton
Bl(sd) 11.24 Tesla-M
SPLref(Sd) 89.5 dB(Re)
Rub-index .02
Method: fixed-Mmd (43.380 grams)
CDR mode: measure (-.12 ohms)
area (sd): 219.04 sq cm
