Need 3000-4000wrms @ .5 ohms or 2 ohms or two 1500-2000wrms amps @ 1 ohm

I have four D4 subwoofers that take on 750-1000wrms each.

I need either two amps that will achieve 1500-2000wrms

or two amplifiers that will do 3000-4000wrms @ .5 ohm daily or 2 ohm.

or an amplifier that is internally strapped to handle two 1 ohm loads (Something like how the Audiopipe AP30001D is. (Two 15001D's internally strapped in one larger case)

This is for a daily driver setup.

I'd prefer 2 ohms over .5 ohms if going with one 3k-4kwrms amplifier.

Budget is under $500 for my friend. He is on a college budget. This isnt for my setup.

 
Last edited by a moderator:
[quote name='BIGJEFF64']If u buy @catman db drive 2k u will get 3k at .5. Those amps r serious[/QUOTE]

I hardly doubt he'll see 3k from that amplifier.
 
Soundstream dtr1.3400 rated 3400@ .5ohm & 2200 @ 1 ohm.... $359 new with warranty at onlinecarstereo. Legit and will do its rated power. Check @taylorfade clamp numbers. 2700 @ rise to 1.2 ohms on only 12.1volts. Serious amp for the price

 
I hardly doubt he'll see 3k from that amplifier.
IIRC a shop in FL who deals with DB drive said that if they get the modded chipset from DB drive they clamped it doin 2800 watts and i think 3200 at 16v. the shops name is T&E Audio in Ft. Pierce but i could be wrong

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

But since you guys are still here, I have another question. Now that I have a 3k amp, after I get my new battery and HO Alternator, I'll be in the...
272
21K
That is the great thing about Maestro products, they are very thorough. Downside is the price tag.
3
322
Lifelong Pioneer Premier series user here. Switched to the Kenwood eXcelon Reference (XR) DDX9905S and never looked back. Excellent sounding...
9
694
How I would approach it is install your new amplifier and start using it. Install a voltage gauge and if you see your voltage lowering then add...
4
449

About this thread

Instigator

Banned
Thread starter
Instigator
Joined
Location
Enid, OK
Start date
Participants
Who Replied
Replies
19
Views
1,485
Last reply date
Last reply from
BIGJEFF64
received_1404248310277849.jpeg

Blackout67

    Jun 10, 2024
  • 0
  • 0
445981256_3731324230470906_9081536917273579948_n.jpg

Decebal

    Jun 10, 2024
  • 0
  • 0

New threads

Top