My US Amps/RE Audio Kia Spec 5

[alexlindeman 10+ year member]

Looking good man.

I really dig the dash kit.

 

[na_rsx 10+ year member]

Looking good man.
I really dig the dash kit.

you everywhere, like me lol

nice setup threadstarter, looking forward to the finished product.

 

[CaliforniabOY5 10+ year member]

i have that exact same tsunami voltage meter (1/2 din). It's really nice however i made a switch to turn it off and on. At night it gets REALLY bright that it almost distracts you from driving. It's not the red in the voltage meter it's the blue that really distracts you. I usually have it off while driving...

 

[troy_audi0 10+ year member]

i have that exact same tsunami voltage meter (1/2 din). It's really nice however i made a switch to turn it off and on. At night it gets REALLY bright that it almost distracts you from driving. It's not the red in the voltage meter it's the blue that really distracts you. I usually have it off while driving...

Nice thanks for the heads up..

I will keep you posted kinda waiting for my gear..

I have an STi to finish up before i can jump in with both feet ..

Todo list

#1:Mod Front Doors (RE XXX are 3.8" deep) Thats 1" deeper than my door

#2:Run 1/0 AWG to the Rear & Make a Fused Distro location (Rear Speaker area)

#3:Ground Distro Block Pass Side Rear Speaker Spot

#4: Glass Tire well & Shoot for 3.5^ft so I can port that *****..

#5: Flush mount US Amps on rear tray

(May do plexi bottom with Amp guts showing)

#6:Full wire job..(speakers, Amps, Volt meters, Distro blocks Fused & Ground)

#7: stuff i forgot

#8: more stuff i forgot..

 

[troy_audi0 10+ year member]

My Tsunami Parts List

Battery Term'z>BT703 X2

 

Fuse Forum Under Hood>V10FHW-ANL

 

Ground Distro Block>DB8012

 

1/0AWG Power/Ground Wire

 

16AWG Speaker Wire

 

Fused Distro Block >V10GM2-MANL

 

[troy_audi0 10+ year member]

Started on a Battery Cover & Here is a look at the rear tray,

I will get door pix & Gear shots later also the dash kit inplace..

Yo Where My Deck At????

..

Enjoy

 

[troy_audi0 10+ year member]

Added a lil bit of my Roadkill last night Got lots todo

You can add that to my todo list

Making a platform for the ANL fuse holder & 1/0 awg runs to hind under..

 

[na_rsx 10+ year member]

wow, that battery cover looks nice, good job, cant wait till its done.

 

[troy_audi0 10+ year member]

GOT SOME GEAR!!!

check it out..

 

[troy_audi0 10+ year member]

Few more pix

(Once Again the Amps will be flush mounted)

 

[troy_audi0 10+ year member]

Got my gear from tsunami.

get some pix up later..

peace..

 

[troy_audi0 10+ year member]

My Tsunami Gear

 

[troy_audi0 10+ year member]

changing up the design a lil bit..

im going to mount the sub on the side & port it thru the rear speaker hole

I will raise the floor about 4" & use it all for air space..

 

still workin on the battery box..

should be sweet

 

[troy_audi0 10+ year member]

ok did a lil mod to the doors..

a lil before & after shot

 

[blackbonnie 5,000+ posts]

lookin good, that battery cover is gonna be sick