My Setup

[rapmaster0 10+ year member]

View attachment 26504488

Hertz HSK165

JL 500/1

JL 12w7

JL 300/4

Any opinions?

One question though, where do I set the frequencies for the mono and 4 channel amp??

Click to read more...

 

[steveyhustle]

get rid of the cap //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif nice should sound clean

 

[ultimate157 5,000+ posts]

Low pass on the sub amp, 60-80hz. Same for the HPF on the highs amp.

 

[rapmaster0 10+ year member]

So 75hz on mono amp and 75hz on 4 channel set to high pass?

 

[rapmaster0 10+ year member]

YAYYYY I got my Hertz speakers...

Now can someone help me with the settings and whatnot, I dont want to blow these speakers now.

I'm bridging the JL300/4 amp => 150watts for each Hertz speaker. what to set the freq?

Anything else to set on the 300/4 before i make another mistake?

What should I set the crossovers too? -2, 0, or +2

Should I keep my eq flat, all at 0? (acura tsx 2006 navi, running off stock HU)

 

[chinxtaboi 10+ year member]

id say go with a 1000/1 for the w7

 

[rapmaster0 10+ year member]

Can anyone help me with settings?

 

[acold7dusta 10+ year member]

little late but nobody else answered:

I'm bridging the JL300/4 amp => 150watts for each Hertz speaker. what to set the freq?

set it at 65 if you want

Anything else to set on the 300/4 before i make another mistake?

leave bass boost at 0, dont set gains too high, make sure HPF (high pass filter) is enabled)

What should I set the crossovers too? -2, 0, or +2

start with 0, if you want it louder, +2, quieter -2

Should I keep my eq flat, all at 0? (acura tsx 2006 navi, running off stock HU)

start with 0, lower the peaks if needed (dont raise the attenuated frequencies)

hope this helps