My Fotoblog

The DQXS has it's own subout;) Therefore, samething.
but no its not. if you dont have the DDC (110 extra) then you cant even mess with the subout. and i for one, enjoy pressing one button on my CDA-9827, and rolling the preout voltage to attenuiate the bass. if i can use the subout on the deck, straight to the subin on the DQSX, and then straight to the subamp, then i can still do this, and retain all the controlls the DQSX uses. and like i said, i only need one lowpass, one bandpass, and one highpass. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

for a 3way setup - its one of the best processors there are. if you know of one with a second bandpass, that has all 24db\oct crossover slopes, and a built in 1\3 octave graphic EQ - that is under $500 and has the 6 inputs - and the ability of a remote - please let me know. //content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif

 
supposibly the best processor for the money on the market.

PXA-H701

Multimedia Manager™,Digital Signal Processor/Dolby Digital and Dolby Pro-Logic/Dolby Pro-Logic ll/DTS Decoder

Features:


  • General-Processors, EQ's and Crossovers
  • 11-Band Digital Parametric EQ
    4 Bands Front, 4 Bands Rear, 2 Bands Center, 1 Band Subwoofer
  • 17 Band Digital Parametric Equalizer
  • 31-Band Graphic Equalizer
  • 4 Volt PreOut
  • 6 PreOuts
  • 6 User Programmable Presets
  • 6/12/18/24/30dB/OFF Selectable Crossover
  • Adjustable Center Delay
  • Ai-NET or RCA Inputs
  • Auto Time Correction
  • Digital Time Correction
  • Dolby Digital®, Dolby Pro-Logic® and DTS® Decoding
  • Gold Plated RCA Jacks
  • Independently Adjustable Channel Level
  • MDAC Digital to Analog Converter
  • Manual Time Correction
  • MediaXpander™
  • Microphone Included
  • Navaigation Mix Input
  • Rear Mix Capibility
  • S.T.A.R. Circuitry
  • Selectable Listening Modes
    Standard/Maximum/Late Night
  • Speaker Selection Mode
    Front: Large/Small
    Center: Large/Small/Off
    Rear: Large/Small/Off
  • Subwoofer Level Control
Specs:


  • General-Processors, EQ's and Crossovers
  • Band 1 : 20/22/25/28/31.5/36/40/45/50/56/63/71/80 (Hz)
  • Band 1 : 20/22/25/28/31.5/40/45/50/56/63/71/80/90/100/110/125/140/160/180/200/220/250/280/315/360/400/450/500 (Hz)
  • Band 2 : 50/56/63/71/80/90/100/110/125/140/160/180/200 (Hz)
  • Band 2 : 50/56/63/71/80/90/100/110/125/140/160/180/200/220/250/280/315/360/400/450/500/560/630/710/800/900/1k/1.1k/1.2k (Hz)
  • Band 3 : 125/140/160/180/200/220/250/280/315/360/400/450/500/560/630/710/800/900/1k/1.1k/1.2k/1.4k/1.6k/1.8k/2k/2.2k/2.5k/2.8k/3.2k (Hz)
  • Band 4 : 315/360/400/450/500/560/630/710/800/900/1k/1.1k/1.2k/1.4k/1.6k/1.8k/2k/2.2k/2.5k/2.8k/3.2k/3.6k/4k/4.5k/5k/5.6k/6.3k/7.1k/8k (Hz)
  • Band 5 : 800/900/1k/1.1k/1.2k/1.4k/1.6k/1.8k/2k/2.2k/2.5k/2.8k/3.2k/3.6k/4k/4.5k/5k/5.6k/6.3k/7.1k/8k/9k/10k/11k/12.5k/14k/16k/18k/20k (Hz)
  • Channel Seperation : 80 dB
  • Controller Size (WxHxD)in : 6-3/4” x 1-13/16” x 1”
  • Controller Size (WxHxD)mm : 170mm x 46mm x 25.7mm
  • Controller Weight : 159 g (5 oz.)
  • DAC resolution : MDAC (Multi-level DAC) 26kHz /24dB
  • Frequency Response : 20Hz—20kHz (±1dB)
  • Input Impedance : Greater Than10k ohms
  • Input Sensitivity : 850mA (2V for analog 1 only)
  • Main Chassis Size (WxHxD)in : 10-3/16” x 1-9/16” x 6-1/4”
  • Main Chassis Size (WxHxD)mm : 260mm x 40mm x 160mm
  • Main Chassis Weight : 1.1Kg (2lbs. 6 oz.)
  • Number of Bands : 17 bands (5 Front, 5 Rear, 5 Center, 2 Subwoofer)
  • Number of D/A Converters : 8
  • Number of Presets : 6 (User Selectable)
  • Number of outputs : 8 (2 Front1 L/R, 2 Front2 L/R, 2 Rear1 L/R, 1 Center, 1 Subwoofer)
  • Output Impedance : Less Than 1k ohms
  • Output Voltage : 4V (with 10 k ohms load)
  • Parametric Eq “Q” Factor : 0.5/1.0/2.0/3.0/4.0/5.0
  • Parametric Eq Boost/Cut Range : ±9dB in steps of 1dB
  • Power Requirement : 11—16V DC (negative ground)
  • Signal to Noise Ratio : 110 dB (Digital Optical In)
  • Subwoofer Crossover Frequency : 20 - 200Hz (1/6 Octave steps)
  • Subwoofer Crossover Slope : 6/12/18/24/30dB
  • Subwoofer Level Control : 0 to +15dB
  • Time Correction Control Range : 0—20ms (0.1ms steps)
  • Total Harmonic Distortion : 0.02%(at 1kHz)

 
that is terribly sexy. i searched for alpine processors a while back and didnt find much. i may have to go this route as it stands (it would be sweet to have both units instead of using the ai-net too. i have enough room with some modifications //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 
so wait. question of the day: does that signal processor have

a.) Five bands

b.) Seven bands

c.) Eleven bands

d.) Seventeen bands

e.) Thirty-One bands

By the description, each answer is correct. :-/

 
lets just say, it'll complete you.//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif
Yes but at what cost. I would have to get the processor and controller, which will run about $600. i dont want to spend much more than $400.

And req, the alpine pxah701 is only compatable with alpine head units that have monitors (like an IVA model of sorts, about $1k from what i see)

Looks like it's audiocontrol for the win //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
And req, the alpine pxah701 is only compatable with alpine head units that have monitors (like an IVA model of sorts, about $1k from what i see)
Looks like it's audiocontrol for the win //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
No sir.
It's compatible with any HU. You don't see the RCA inputs or the digital inputs? There's plenty of people using them with Eclipse HU. It's just that You'll need the controller if you went that route. Alpine's high:greedy: HU with screens just have the ability to control that processor w/o the the remote.

He asked for a processor under $500 with the ability of remote, and I showed him one.//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif There's absolutely nothing wrong with the AC piece, it's awesome and I'm sure you'll enjoy going that route.

 
No sir.
It's compatible with any HU. You don't see the RCA inputs or the digital inputs? There's plenty of people using them with Eclipse HU. It's just that You'll need the controller if you went that route. Alpine's high:greedy: HU with screens just have the ability to control that processor w/o the the remote.

He asked for a processor under $500 with the ability of remote, and I showed him one.//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif There's absolutely nothing wrong with the AC piece, it's awesome and I'm sure you'll enjoy going that route.
There's no reason the 9835 shouldn't be able to control that thing, but it can't and that pisses me off.

 
well i might be getting a new jorb, so who knows //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

GCAdidas13

10+ year member
heh.
Thread starter
GCAdidas13
Joined
Location
Grove City, OH
Start date
Participants
Who Replied
Replies
162
Views
7,903
Last reply date
Last reply from
req
Screenshot 2024-05-31 182935.png

Doxquzme

    Jun 15, 2024
  • 0
  • 0
Screenshot 2024-05-31 182324.png

Doxquzme

    Jun 15, 2024
  • 0
  • 0

New threads

Top