MTX amp, P.A.P. amp , COUSTIC line driver/crossover

  • 2
    Participant count
  • Participant list

SCIVIC94
10+ year member

if it isnt broke,modify
Item(s) for Sale:

Item(s) Description/Condition:

Up for sale is a few spare amps i am not using.

1st up are some rare Peirce Audio Products amps from early 2000's. this was the only amp they released. they are 4 channels and have been mounted but never in a car.

EMP Series

45WATTS RMS X 4CHANNELS @ 4ohm

90 WATTS RMS X 2 CHANNELS @ 4 ohm

FOOTPRINT IS 10 INCHES X 9 3/8 INCHES

next up is a Coustic xm6 crossover/lindriver

this unit is great for use with headunits that have only 1 set or 2 sets of rca's and you want to run a full system. output single up to 8volts. this also was mounted but never in a car. lots of tuning capability with this unit.

last is an MTX 4160. the way you see you it is how i got it. had it in my truck for almost 2 years. works great. unit is a 4 channel.

20 watts rms x4 @ 4 ohm

40 Watts rms x 4 @ 2 ohm

80 watts rms bridged x 2 @ 4ohms

200 watts dynamic bridges X2 @4 ohms

keep an eye out later this evening will be adding an old kicker zr240 once i get pics.

Price:

P.A.P $55 each shipped or $100 for the pair

Coustic XM6 $80 shipped

MTX4160 $50 shipped.

Shipping and Miscellaneous Item Information:

Item Pictures:

(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

10433863_1726029690758516_7137761120576034064_n.jpg


20231953_1726030457425106_1203228310799195810_o.jpg


20229574_1726030764091742_5465734500360361078_o.jpg


20229454_1726228567405295_1097763231192439812_o.jpg


20121227_1726030004091818_8385967695500632981_o.jpg


20157105_1726029934091825_685174846237970015_o.jpg


20121416_1726031087425043_439376538749467606_o.jpg


20106477_1726031227425029_1290273932835434805_n.jpg


 
Used to own a 4160 ....****** little amp. What happened to the original mounting feet? Pretty sure they were nylon(material used) and screwed onto the back.

 
not sure what happened to them how you see it is how i got it. my guess is someone over the course of its life over-tightened the mounting screws and cracked them.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

You can wire those subs up @8 ohms if they are both SVC4 ohm subs,and that amp will run fine after being tuned properly...
4
1K
Thanks buddy! Given me a lot to think about in terms of what to do; I've been watching YouTube videos on this stuff all day as well so I really...
4
775
The 240 should be 2x40/ 2ch. rated at 11.9v. Should generate close to 50+ @14v rms. Only Rated @4 ohms bridged Mono.. Should be around 125 rms...
5
2K
In 1990: The MTX MTA 225 had a MSRP of 549.95 25x2 0.02% THD S/N 102 12x 8 1/2x 2 3/8 The MTX MTA 250 had a MSRP of 649.95 50x2 0.02% THD S/N...
5
2K
It would also be easy to add an equalizer to have individual rca inputs for all of the channels. A decent one can be had for less than $40...
6
124

About this thread

SCIVIC94

10+ year member
if it isnt broke,modify
Thread starter
SCIVIC94
Joined
Location
ELIZABETH , NJ
Start date
Participants
Who Replied
Replies
2
Views
799
Last reply date
Last reply from
SCIVIC94
20240518_170822.jpg

Dylan27

    May 18, 2024
  • 0
  • 0
20240517_190901.jpg

Dylan27

    May 18, 2024
  • 0
  • 0

New threads

Top