mtx 9500 in sledgehammer box

kappas ported or sealed?
im sure that the mtx could use a bigger box though....
Trust me. If you get the 9500 sledgehammer(s) and power to RMS with a burly ass amp. 2 if not 3 or 4 Kappas could be mobbed over by 2 9500 10's for sure. The Kappa Perfect 12" VQ handles 400 watts RMS. Try 800 watts RMS for a thunder9500 10"!!! Straight up 1000watts for the 12's. There is no Infinity within reach of the 7500 series even. And there is no chance a Kappa 12" could take the wattage to one 10" MTX and not fall apart like a little, broken, sub, crap, thing...... Huh. Anyways, yeah MTX's are real sick. Real sick!!

 
Trust me. If you get the 9500 sledgehammer(s) and power to RMS with a burly ass amp. 2 if not 3 or 4 Kappas could be mobbed over by 2 9500 10's for sure. The Kappa Perfect 12" VQ handles 400 watts RMS. Try 800 watts RMS for a thunder9500 10"!!! Straight up 1000watts for the 12's. There is no Infinity within reach of the 7500 series even. And there is no chance a Kappa 12" could take the wattage to one 10" MTX and not fall apart like a little, broken, sub, crap, thing...... Huh. Anyways, yeah MTX's are real sick. Real sick!!
Dude STFU. You do not compare subs by their RMS. That, and Perfect's would pwnt the 9500 in SQ.

 
I've heard that the 9500 series actually has fairly decent SQ.

As far as the question on hand, it is POSSIBLE for the 9500 to beat out the two perfects, but it is not likely just becasue of cone area differences when comparing a single 10 to two 12's.

Build a large ported box and fully power the MTX, and you'll have a chance if the perfects are sealed. Otherwise I wouldn't bet on it. Either way prefab is probably not the way to go on boxes.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Thanks buddy! Given me a lot to think about in terms of what to do; I've been watching YouTube videos on this stuff all day as well so I really...
4
862
You can wire those subs up @8 ohms if they are both SVC4 ohm subs,and that amp will run fine after being tuned properly...
4
1K
The 240 should be 2x40/ 2ch. rated at 11.9v. Should generate close to 50+ @14v rms. Only Rated @4 ohms bridged Mono.. Should be around 125 rms...
5
2K
In 1990: The MTX MTA 225 had a MSRP of 549.95 25x2 0.02% THD S/N 102 12x 8 1/2x 2 3/8 The MTX MTA 250 had a MSRP of 649.95 50x2 0.02% THD S/N...
5
2K

About this thread

mmmwings

10+ year member
Member
Thread starter
mmmwings
Joined
Location
Omaha, NE
Start date
Participants
Who Replied
Replies
7
Views
3,025
Last reply date
Last reply from
Berry47
Screenshot_20240609-212906.png

Blackout67

    Jun 9, 2024
  • 0
  • 0
Screenshot_20240609-212805.png

Blackout67

    Jun 9, 2024
  • 0
  • 0

New threads

Top