MTX 9500 and TA81001 Help

jbizzle
5,000+ posts

CarAudio.com Veteran
5,940
0
Chicago, IL
I recently purchased a MTX 9500 with a sledgehammer encloser for $500 and the TA81001 amp for $600 I wanted to know if I had gotten ripped off? Because I see many other amps that are pushing MORE rms power for cheaper price.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Thanks buddy! Given me a lot to think about in terms of what to do; I've been watching YouTube videos on this stuff all day as well so I really...
4
843
You can wire those subs up @8 ohms if they are both SVC4 ohm subs,and that amp will run fine after being tuned properly...
4
1K
The 240 should be 2x40/ 2ch. rated at 11.9v. Should generate close to 50+ @14v rms. Only Rated @4 ohms bridged Mono.. Should be around 125 rms...
5
2K
In 1990: The MTX MTA 225 had a MSRP of 549.95 25x2 0.02% THD S/N 102 12x 8 1/2x 2 3/8 The MTX MTA 250 had a MSRP of 649.95 50x2 0.02% THD S/N...
5
2K

About this thread

jbizzle

5,000+ posts
CarAudio.com Veteran
Thread starter
jbizzle
Joined
Location
Chicago, IL
Start date
Participants
Who Replied
Replies
13
Views
748
Last reply date
Last reply from
mlstrass
all out.jpg

Popwarhomie

    Jun 2, 2024
  • 0
  • 0
all out.jpg

Popwarhomie

    Jun 2, 2024
  • 0
  • 0

New threads

Top