more power???

[tcguy85 10+ year member]

agreed

ok. lol //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[dbhittin 5,000+ posts]

there in a caddy.. thats your problem.. the backseat is solid

 

[1badazzbimmer 10+ year member]

i used a 0db

 

[1badazzbimmer 10+ year member]

it seems like my system beats harder at lower levels than what i usually listen to. like if im at a light i tuern it down and it seeems to bump harder??????

 

[1badazzbimmer 10+ year member]

there is a plastic thick wall behind the seat

 

[skydeaner 10+ year member]

No music is at 0db FYI... Use your ears, or if you really want to do it the right way use an oscope. But ears work best. i am sure one of the people here on the forums are pretty close and can help you set up the amp. I am sure that amp can drive those subs no problem. Where do you live?

 

[dbhittin 5,000+ posts]

my caddy had a metal wall

 

[IonSQL 10+ year member]

The old W6's did not come as dual 4 ohm config, they were dual 6 only... if those are dual 4, they are not W6's

 

[1badazzbimmer 10+ year member]

im in indianapolis

 

[1badazzbimmer 10+ year member]

IONSQL is right i ment to say dual 6 ohm.. eiether way it is still 1.5 ohm when ran in parrallel to the mono amp

 

[IonSQL 10+ year member]

IONSQL is right i ment to say dual 6 ohm.. eiether way it is still 1 ohm when ran in parrallel to the mono amp

No, it's 1.5 ohms...

 

[tcguy85 10+ year member]

No music is at 0db FYI... Use your ears, or if you really want to do it the right way use an oscope. But ears work best. i am sure one of the people here on the forums are pretty close and can help you set up the amp. I am sure that amp can drive those subs no problem. Where do you live?

exactly. if you feel the need to use a dmm, at least use a -3db test tone.