mmats juggernaut

[ultimate157 5,000+ posts]

Was there a standard coil configuration for the 6-spoke juggernauts? I'm looking at picking up an 18" but the guy doesn't say what the VC's are.

According to MMATs, the current generation (12-spoke) is dual 2's with a 1500wrms power handling.

Actually, a complete spec list would help greatly //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Click to read more...

 

[Punk In Drublic 10+ year member]

you could use a multimeter to find out the ohm load

 

[icpurplepplalot 5,000+ posts]

dual 1.4 is what they were from factory

 

[ultimate157 5,000+ posts]

you could use a multimeter to find out the ohm load

Don't have access to sub.

 

[NDMstang65 10+ year member]

They come stock as dual 2's with a 4 layer roundwire coil 32mm long...tiny coil

 

[ultimate157 5,000+ posts]

They come stock as dual 2's with a 4 layer roundwire coil 32mm long...tiny coil

if its so small how can it handle 1.5kw? whats the diameter?

 

[icpurplepplalot 5,000+ posts]

it definantly can handle more than 1500 wrms, atleast the older ones could

and it's a 3 inch coil

 

[thegreatestpenn 5,000+ posts]

yes, it can

 

[NDMstang65 10+ year member]

if its so small how can it handle 1.5kw? whats the diameter?

3" coil...

The cooling holes in the top plate help it a good bit..if it was just a regular plate the coil would probably burn up around 800 watts...

If i had one here with me i'd show it to you but i'm about 120 miles from a recone that i built up for the jugg...

 

[negative3five 10+ year member]

How much do you think a DD 9500B could take daily? Thier almost the same thing I think... anybody have a DD 9500D motor FS pm me...

 

[sandbags 10+ year member]

They come stock as dual 2's with a 4 layer roundwire coil 32mm long...tiny coil

how do u know its 32mm? Did you recone a newer jugg. I only ask cuz mine were wound longer than that at dual 1.4s at least from what i remember

 

[NDMstang65 10+ year member]

how do u know its 32mm? Did you recone a newer jugg. I only ask cuz mine were wound longer than that at dual 1.4s at least from what i remember

The ones that were made by Resonance originally and the series right after Mmats left them as a buildhouse were dual 2ohm 32mm long...i haven't touched a new one.

I've got the soft parts sitting beside me...and a set of calipers //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif.

 

[sandbags 10+ year member]

the ones i had were 2005 models