MB Quart PWD And cap

[Free_Style 10+ year member]

Ok guys this is first post and I think you in for it.

WHAT I HAVE

1. 98' Tahoe

2. Eclipse Head Unit

3. Phoenix Gold TI 575.4 running 2 sets of MB quart 6.5's

4. Phoenix Gold TI 400.2 Running 1 12" PWD Quart Just got this

5. 1 Farad cap

6. Sealed RED TOP Battery 0 gauge wire.

I already have door speakers set up and running. I need to set up the SUB, AMP, and CAP.

?

1. Should I use the cap for both or Just the sub?

2. Should I split the power wire with 2 blocks with 2 outlets or just 1 with 4 outlets?

3. Can I tap into the singnal wire to turn on both amps?

4. Should I ground the cap to the same spot under the rear seat were the 575.4 is grounded useing a block. Or sould I just ground it to the rear cargo area were the sub will be?

5. The CAP instructions say don't use blocks with fuses. Just a fuse by the battery is this true?

Hope you can help I will have pics soon. Thanks

Click to read more...

 

[shpw]

you dont have to use diffrent blocks for power just use the power wire coming back into your disribution block run one wire close from your distibution block to your positive on your cap and another from your cap to your sub amp keeping your cap as close to your sub amp as posible and running 2 diffrent grounds is good idea but dont have too and you use same rmote tur on wire to run both amps i tkink that was all your quetions???