Sold MA 1" Tweeters, Alpine 5ch

[RidnClean 5,000+ posts]

1. Product:

MA 588 tweeters

2. Specs:

30w Rms Per Driver, 1" Super Dome Tweeter, 90.2db 2khz-22KHZ

3. Description/Condition:

BNIB

4. Price: :

$45shipped

5. Pictures:

Click to read more...

 

[RidnClean 5,000+ posts]

1. Product:

Alpine MRP F320 5ch Amplifier

2. Specs:

Product MPNMPN MRP-F320 Key FeaturesAmplifier Type

Multi Channels Bridgable

Bridgable RMS Power at 4 Ohms 40 W x 4 + 120 W x 1 RMS Power at 2 Ohms 50 W x 4 + Sub PerformanceFrequency Response 10 Hz - 50000 Hz Signal to Noise Ratio

100 dB THD at Rated RMS Power 0.08 % Crossover / EqualizerBass Boost

With Bass Boost Bass Boost Frequency 50 Hz Low - Pass Frequency 50 Hz - 200 Hz Other FeaturesInput Voltage 11 volt MOSFET Circuitry Yes 3 Way Ready Yes DimensionsWidth 9 in. Depth 10.81 in. Height 2.25 in.

3. Description/Condition:

a few scratches on the case, but nothin major.

4. Price: :

$65shipped

5. Pictures:

 

[RidnClean 5,000+ posts]

bump

 

[RidnClean 5,000+ posts]

bump

lets move this gear

 

[ciaonzo 5,000+ posts]

Good prices sir.

It may not be a powerhouse but that Alpine is a great sounding amplifier.

It would have already been mine if I needed it.

GLWS.

 

[RidnClean 5,000+ posts]

thanks man

bump

 

[Flipx99 5,000+ posts]

On the amp, can you control the xover on both chans 1/2 and chans 3/4 or does one xover control both?

 

[RidnClean 5,000+ posts]

On the amp, can you control the xover on both chans 1/2 and chans 3/4 or does one xover control both?

didn't even notice.

it seems its controlled by 1 knob.

so no, you cant individual channels.

 

[ciaonzo 5,000+ posts]

For channels 1/2 you can choose from full pass or 80hz fixed.

For channels 3/4 you can choose from full pass or 80hz fixed.

For the subwoofer channel you can vary it from 50hz to 200hz.

 

[RidnClean 5,000+ posts]

Thanks once again //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

bump!

 

[RidnClean 5,000+ posts]

bump

 

[RidnClean 5,000+ posts]

bump

 

[RidnClean 5,000+ posts]

bump make some offers

 

[BLD 25 10+ year member]

so is this only stable at 4ohm in the sub channel?

 

[RidnClean 5,000+ posts]

so is this only stable at 4ohm in the sub channel?

yes, only 4ohm stable

http://www.crutchfield.com/S-HE9hId9byri/p_500MRPF320/Alpine-MRP-F320.html?tab=detailed_info