M3 or Z1a

[9515ROB 10+ year member]

i might just get the dual 1s and not really worry about wiring them down for comps

 

[TurdFergueson2 5,000+ posts]

pm Jason19 if you wanna go with the M3. He's up in Kenosha so if you want to take the drive, it could save you some money maybe.

HE should have a fs ad on here.

 

[9515ROB 10+ year member]

i would but im broke i got to pay 4 1 recone and im hoping the other recone will b free since they ****ed it up last time i got it reconed

 

[Redlineaudio 10+ year member]

I would do D 1.5 and run one amp per sub for daily. or sale the M3 and get an M4.

 

[2003F150 10+ year member]

i might just get the dual 1s and not really worry about wiring them down for comps

get dual 4's instead of dual one's...still 1 ohm strapped(.5 ohm a amp) but you have more wire in the gap and dual 1 cost more //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[9515ROB 10+ year member]

get dual 4's instead of dual one's...still 1 ohm strapped(.5 ohm a amp) but you have more wire in the gap and dual 1 cost more //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

im not to worried about the cost bc i know it wont be to much more... I dont know im really thinking about dual 1s it just seems like i got more opptions down the road if i ever do switch something up

 

[Papermaker85 5,000+ posts]

M3s barely do rated power..

the z1a is a good amp..

if you want enough power to push 2 95Gs you should look into a pair of DAT HF2500.1s.. there basically a 3kw board rated fof 2.5.. not to mention there DF and slew rate are superior to the DD.. also the mmats 2000.1s sundown 4500 would do as well after impedance rise..

running amps down to .5 just kills damping and slew rate..

 

[9515ROB 10+ year member]

M3s barely do rated power..the z1a is a good amp..

if you want enough power to push 2 95Gs you should look into a pair of DAT HF2500.1s.. there basically a 3kw board rated fof 2.5.. not to mention there DF and slew rate are superior to the DD.. also the mmats 2000.1s sundown 4500 would do as well after impedance rise..

running amps down to .5 just kills damping and slew rate..

u r dumb u dont know shit about the m3 it actualy will put out more than rated and that amp is fu(king bullet proof even ur dumb *** couldnt **** it up and alot of people run them at .5 daily with no problem and there was a guy running his at .25 daily

 

[loudmofo 5,000+ posts]

the m3 is a monster i had both and rather have 2 m3 then a z1a and the diablo company mite be going under i hear.

 

[9515ROB 10+ year member]

yea thats who i want to buy from a company that doesnt know how to take care of there money

 

[Redlineaudio 10+ year member]

Also the only way to get a Z1 is used, They are not in the lineup this year or really last year, have not seen what 10 is going to bring.

 

[Papermaker85 5,000+ posts]

u r dumb u dont know shit about the m3 it actualy will put out more than rated and that amp is fu(king bullet proof even ur dumb *** couldnt **** it up and alot of people run them at .5 daily with no problem and there was a guy running his at .25 daily

DD makes great stuff..

it was benched @13.8@1ohm by usaci and it managed around 2k...

you guys benching amps aren't getting a true rms reading..

those test you saw are upwards of 10%thd

http://usaci.forumotion.com/general-discussion-f11/ddm3-protest-results-t3219-75.htm

now give daddy a kiss..

the DAT 2500 over the m3 anyday cheaper too..

 

[heyitsmekyle15 10+ year member]

M3s barely do rated power..the z1a is a good amp..

if you want enough power to push 2 95Gs you should look into a pair of DAT HF2500.1s.. there basically a 3kw board rated fof 2.5.. not to mention there DF and slew rate are superior to the DD.. also the mmats 2000.1s sundown 4500 would do as well after impedance rise..

running amps down to .5 just kills damping and slew rate..

lol, barely do rated power my ***.

 

[Papermaker85 5,000+ posts]

lol, barely do rated power my ***.

yes sir..

 

[heyitsmekyle15 10+ year member]

yes sir..

Well we got one to do almost 6500 on a 15.7 volt charge on some caps wired down to .17 ohms with rise up to .5. Would you call that Barely rated power? Not to mention on the same wiring running off of 2 kinetik hc2400's we got it to do 4400 watts. Those amps shine at about .5 ohms.