Lumina 2000 wiring help

thefallen2007
10+ year member

Junior Member
Im putting a new head unit into my friend's 2000 Lumina, and cant figure out what wires are which. I have the four speakers seperated from the rest, so thats eight wires down., but there is like 6 left. If anyone has any help it is much appreciated.

 
Did you cut off the factory plug?

Other than the speakers, you have switched power (yellow), constant power (orange), ground (black or black/white), two different illumination wires (brown and gray, or brown/white and gray/white) and possibly speed sense (green). Make sure you didn't mix up the yellow or green speaker wires with the other yellow and green wires in the harness.

If you cut off the factory plug, next time leave it on and get a wire harness for the new deck.

 
Ok, I connected them to thier proper places, and the headunit turns on, but then goes off and wont come back on. when i disconnect the main power and try again it does the same thing, so i know that the memory is right. Do you think i might need to replace the ground or run a new one. I dont have a clue but that is my guess.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

thefallen2007

10+ year member
Junior Member
Thread starter
thefallen2007
Joined
Location
Texas
Start date
Participants
Who Replied
Replies
2
Views
457
Last reply date
Last reply from
thefallen2007
IMG_20260513_214311575.jpg

ThxOne

    May 13, 2026
  • 0
  • 0
IMG_20260513_213956814.jpg

ThxOne

    May 13, 2026
  • 0
  • 0

New threads

Top