Low Freq....

[ThirdCoastS-10 10+ year member]

my sub cuts out....any thoughts?

http://www.pioneerelectronics.com/pna/product/detail/0,,2076_4059_66349981_tab=B,00.html?compName=PNA_ProductDetailComponent

Click to read more...

 

[Fast1one 10+ year member]

Be sure your gains are set correctly. What could happen is that impediance rise may not be as big at low frequencies causing the amp to clip at those frequencies. Lower your gains slightly...

 

[ThirdCoastS-10 10+ year member]

But my gains on my amp are set uber low.....almost the lowest...

 

[ThirdCoastS-10 10+ year member]

Noone?

 

[BASSMEKANIK 10+ year member]

your a tard... thats why...

B.

 

[ThirdCoastS-10 10+ year member]

your a tard... thats why...


B.

While I really appreciate your monosyllabic insults….please if you don’t have a helpful one please don’t post.

//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[neonrt 10+ year member]

might help if you explained yourself a bit more in detail rather than just saying low freq, my sub cuts out? you are just asking to get flamed with your post.

 

[ThirdCoastS-10 10+ year member]

Uh...i don't know how else to say it, at low freqs. My 10 will cut out, if i drop the volume, to a really low level they stay even at the lower freqs. but when i raise my volume they seem to have trouble

 

[Fast1one 10+ year member]

But my gains on my amp are set uber low.....almost the lowest...

Your input voltage could still be high enough to clip the amp, doubt thats the problem though...check all grounds and your charging system?

 

[ThirdCoastS-10 10+ year member]

Yea i think my grounds are all ok, and the alt keeps everything running and charged...

 

[jmoreno150 10+ year member]

Is Ur Amp Heating Up?

 

[ThirdCoastS-10 10+ year member]

No it has plenty of air, and keeps cool.....

I changed from a 12 to a 10 and it started to do this...

 

[ThirdCoastS-10 10+ year member]

bump

 

[SQBubble 10+ year member]

box specs?

 

[Fast1one 10+ year member]

Last thing I can think of is the tinsels. If they are attached poorly the high excursion from low frequencies can be the cause of cutting out, after that im fresh out of ideas...