Looky what I made (Team PSI/ Brahma hybrid)

[groundpound4200 5,000+ posts]

Team PSI recone with direct leads and a 4 layer coil IIRC. Its my first recone but I did my research before doing it. I also added an 8" DD CF cap

She's all held together with TeamPSI rubberized CA glue as well

Click to read more...

 

[groundpound4200 5,000+ posts]

and some vids...

 

[Varinabassing 10+ year member]

cant wait to see it in action I wanna try somethng like this but with cheap parts first to get the process down

Didnt see the second post

 

[groundpound4200 5,000+ posts]

check the third vid.... it gets movin pretty good

 

[KHARPS 10+ year member]

Is there a pole vent on the bottom of the motor?

 

[groundpound4200 5,000+ posts]

yes there is a pole vent. THis is supposed to be the "good" brahma motor with 3" coils

 

[groundpound4200 5,000+ posts]

Set up for 15" AQ basket

Dual 2 ohm 4 layer Flatwind

SSP Suspension

Spider Adapter

Sewn Leadwire

8ga Premium Direct Connect

6" PSI Dustcap

theres some better specs ^^^

 

[brmcm15 10+ year member]

very nice.

what amp are you using?

d9?

 

[groundpound4200 5,000+ posts]

well, I dont really have a need for it, I just wanted to put it together. I suppose I could run it off my US Amps VLX-25 @ 2 ohms bridged. It's supposed to take the 1600 RMS that the original Brahma couldnt.

*edit for the ninja edit above- yeah it was a D9 for the videos. It was also before adding the carbon cap

 

[AQHDC3 10+ year member]

Looks pretty good

 

[Vince Offer 10+ year member]

Definitely a nice sub.

 

[groundpound4200 5,000+ posts]

Definitely a nice sub.

thanks Vince. That means a lot coming from you //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[groundpound4200 5,000+ posts]

bish is murdered out.... anyone who is local and wants to buy this I have a 3.5 cube box tuned to 32hz that is finished in black bedliner to complete the look //content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif

 

[audioholic 5,000+ posts]

The motor appears to be the MKII version, if memory serves me correctly.

 

[groundpound4200 5,000+ posts]

It was either MkI or MkII. I dont remember. the motor itself is in good condition though. I just htought it would be a cool project. The custome spider ring that TeamPSI made me to mate up with this basket made it a no brainer to put this together. The only thing I had to do was bore out the holes in the DD/AQ basket to accept 8 gauge direct connects